The force required to activate operable parts would be limited to 5 lbs. (22.2 N) maximum....
Search Results "Maximum Reach Depth"
-
407.9 Operation (Section-by-Section Analysis)
-
208.1.2
208.1.2 A facility that is making alterations under section 202 as required by s.303(a) of the Americans with Disabilities Act of 1990 must comply with section 208 to the maximum extent...
-
11B-1008.2.4.2 Elevated
The clear width of accessible routes connecting elevated play components shall be permitted to be reduced to 32 inches (813 mm) minimum for a distance of 24 inches (610 mm) maximum provided...
-
10.3.1(1)
The circulation path, including an accessible entrance and an accessible route, for persons with disabilities shall, to the maximum extent practicable, coincide with the circulation path...
-
4.26.2* SIZE AND SPACING OF GRAB BARS AND HANDRAILS
Handrails may be located in a recess if the recess is a maximum of 3 in (75 mm) deep and extends at least 18 in (455 mm) above the top of the rail (see Fig. 39(d))....
-
7.4.10.2 Outdoor Recreation Access Routes (ORARs)
In alterations to existing trailheads, where a condition for exception prohibits compliance with a technical provision, the ORAR shall comply with FSORAG 2.0 to maximum extent practicable...
-
§1630.1(c)(4) Broad coverage
Amendments Act's purpose of reinstating a broad scope of protection under the ADA, the definition of “disability” in this part shall be construed broadly in favor of expansive coverage to the maximum...
-
§ 37.43(a)(2)
alteration that affects or could affect the usability of or access to an area of a facility containing a primary function, the entity shall make the alteration in such a manner that, to the maximum...
-
11B-810.2.3 Connection
alighting areas shall provide a detectable transition between the boarding/alighting area and the roadway; the detectable transition shall consist of a curb with the face sloped at 35 degrees maximum...
-
11B-1008.2.4.2 Elevated
The clear width of accessible routes connecting elevated play components shall be permitted to be reduced to 32 inches (813 mm) minimum for a distance of 24 inches (610 mm) maximum provided...
-
11B-810.2.3 Connection
alighting areas shall provide a detectable transition between the boarding/alighting area and the roadway; the detectable transition shall consist of a curb with the face sloped at 35 degrees maximum...
-
Running Slope [1017.7.1]
Table 2—Maximum Running Slope and Segment Length Running Slope of Trail Segment Maximum Length of Segment Steeper Than But Not Steeper Than ...
-
R402 Protruding Objects (Section-by-Section Analysis)
between posts and the clear distance between the posts is more than 305 millimeters (1 foot), the lowest edge of the object must be 685 millimeters (2.25 feet) minimum or 2 meters (6.7 feet) maximum...
-
Revised and New Standards for Buildings and Facilities
Newly designed and constructed places of lodging must comply with the new 2010 ADA Standards, and alterations must comply to the maximum extent feasible....
-
Exterior Routes
EXTERIOR ROUTES Floor and ground surfaces stable, firm and slip resistant. 11B-302.1 Openings in floor or ground surfaces 1/2 inch maximum...
-
Exterior Routes
EXTERIOR ROUTES Floor and ground surfaces stable, firm and slip resistant. 11B-302.1 Openings in floor or ground surfaces 1/2 inch maximum...
-
Surfaces (R302.7) (Section-by-Section Analysis)
., vertical difference in level between two adjacent surfaces, see R105.5) must be 13 millimeters (0.5 inch) maximum....
-
11B-604.8.1.2 Doors
Where located in the front partition, the door opening shall be 4 inches (102 mm) maximum from the side wall or partition farthest from the water closet....
-
5 Key Warranty Features to Compare Before Hiring a Roofer
Manufacturers often reserve their best warranties for contractors who have reached a certain level of certification....
-
1124B
SECTION 1118B - SPACE ALLOWANCE AND REACH RANGES 1118B.4 Clear floor or ground space for wheelchairs. 1. Size and approach. ...
-
References
Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical. 303.3 Beveled....
-
2. Updates to Functional Performance Criteria: 508 Standards and 255 Guidelines
Provide at least one mode that does not require user fine motor control or simultaneous actions. 302.8 With Limited Reach or Strength....
-
11B-307.4 Vertical clearance
The leading edge of such guardrail or barrier shall be located 27 inches (686 mm) maximum above the finish floor or ground....
-
Companion Seats
., in water rides where the rider’s center of gravity is critical) operators must comply with this provision to the maximum extent feasible....