Measuring Opening Force The maximum force pertains to the continuous application of force necessary to fully open a door, not the initial force needed to overcome the inertia of the door...
Search Results "Maximum Reach Depth"
-
Measuring Opening Force
-
4.26.2* Size and Spacing of Grab Bars and Handrails
Handrails may be located in a recess if the recess is a maximum of 3 in (75 mm) deep and extends at least 18 in (455 mm) above the top of the rail (see Fig. 39(d))....
-
6.7.1 Running Slope (Grade)
Running Slope (Grade) and Resting Intervals Running Slope (Grade) and Resting Intervals on Beach Access Routes Maximum Length of Segment Steeper than But not...
-
405.9 Edge Protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of 1/2 inch (13 mm) maximum within 10 inches (255 mm) horizontally of the minimum landing area...
-
1011.4 Picnic Tables
technical requirements for dining surfaces in 902.3 of the Architectural Barriers Act Accessibility Guidelines, which requires the tops of dining surfaces to be 28 inches minimum and 34 inches maximum...
-
Escalators
The referenced ASME criteria require steps to be demarcated by yellow lines 2” wide maximum along the back and sides (§6.1.3.5.6) and specify at least 2, but no more than 4, flat steps at...
-
M101.3 Equivalent Facilitation
., use of a patient lift) are not permitted because they do not provide for independent access to and use of diagnostic equipment by patients with disabilities to the maximum extent possible...
-
11B-303.5 Warning curbs
A warning curb is not required when a guard or handrail is provided with a guide rail centered 2 inches (51 mm) minimum and 4 inches (102 mm) maximum above the surface of the walk or sidewalk...
-
1607A.8.2 Grab bars, shower seats and dressing room bench seats
room bench seat systems shall be designed to resist a single concentrated load of 250 pounds (1.11 kN) applied in any direction at any point on the grab bar or seat so as to produce the maximum...
-
11B-603.5 Accessories
All operable parts, including coin slots, shall be 40 inches (1016 mm) maximum above the finish floor....
-
11B-1005.2.1 Height
At least 25 percent of the railings, guards, or handrails shall be 34 inches (864 mm) maximum above the ground or deck surface....
-
11B-1005.2.1 Height
At least 25 percent of the railings, guards, or handrails shall be 34 inches (864 mm) maximum above the ground or deck surface....
-
11B-407.2.1.4 Location
Responding cars are programmed for maximum efficiency by reducing the number of stops any passenger experiences. ◼...
-
11B-603.5 Accessories
All operable parts, including coin slots, shall be 40 inches (1016 mm) maximum above the finish floor....
-
11B-1008.2.4.2 Elevated
Exceptions: The clear width of accessible routes connecting elevated play components shall be permitted to be reduced to 32 inches (813 mm) minimum for a distance of 24 inches (610 mm) maximum...
-
205 Operable Parts, F205 Operable Parts
parts located on accessible elements and accessible routes and in accessible rooms and spaces to comply with the technical requirements for operable parts, including clear floor space, reach...
-
Grab bars
The grab bars were designed to be 16 inches long so that they could span the depth of the platforms....
-
Door King Inc. 6004 Column Mount Swing Gate Operator
Exit and Reverse plug-in loop detectors 90° in approximately 12 seconds Gate overlap feature for dual gate operation Magnetic lock power circuit Built-in reset and test buttons Maximum...
-
Detectable Warning Surfaces on Curb Ramps (Section-by-Section Analysis)
public-rights-of-way/background/state-dot-curb-ramp-standard-drawings-with-detectable-warning-details. 30The DOJ 1991 Standards require detectable warning surfaces to extend the full width and depth...
-
Bobrick Koala Kare Child Protection Seat Baby Changing Station KB102
Unit Dimensions: 12¼” W x 18¾” H (311 mm x 476 mm) Depth (closed): 5⅝” (143 mm) Extension (open): 12¼” (311 mm) Shipping Weight: 6 lbs Available in two colors...
-
Inclusion Solutions Model 2000 Voting Booth with Light (Hard Curtain)
Writing surface height - 33.75" Clearance under writing surface (knee space) - 31" Width between legs at the floor - 42" Width between legs at 27" height - 35" Writing Surface depth...
-
Inclusion Solutions Model 2000 Voting Booth (Hard Curtain)
- 33.75" Clearance under writing surface (knee space) - 31" Width between legs at the floor - 42" Width between legs at 27" height - 35" Writing Surface depth...
-
Inclusion Solutions Poll Star Voting Booth
Side panels can be custom screen printed Corrugated plastic storage case Product specifications: Overall height - 54.25" Writing surface height - 33.75" Writing surface depth...
