Application For single or double door Door Thickness 1-3/8" - 2", specify when other than 1-3/4" Device Length 36" for 30" to 36" wide openings 48" for 36" to 48" wide openings Stile Width...
Search Results "Curb Ramp Width"
Filters
Commonly Searched Documents
-
TownSteel TS8000 Grade 2 Fire Rim Device
-
eone Bradley Classic Timepiece
DIMENSIONS 40 mm (diameter) / 11.5mm (thickness) CASE MATERIAL Titanium FITTING Wrist size 6 1/4 inches - 8 1/2 inches (160-215mm), 20mm width WRISTBAND MATERIAL Stainless...
-
Freedom Trax Motorized Track System
Specifications Weight Capacity: 285lbs Weight: 55 lbs without Batteries Fits Wheelchair Width: 16" to 26" Overall Length: 36" Device Height: 9"...
-
Accessible Play Components
Accessible play components are required to be on accessible routes, including elevated play components that are required to be connected by ramps....
-
209 Passenger Loading Zones
In bus loading zones restricted to use by designated or specified public transportation vehicles, each bus bay, bus stop, or other area designated for lift or ramp deployment shall comply...
-
1009.1 Accessible means of egress required
In assembly areas with ramped aisles or stepped aisles, one accessible means of egress is permitted where the common path of egress travel is accessible and meets the requirements in Section...
-
§ 38.77(c)
(c) At all doors on level-entry vehicles, and at each entrance accessible by lift, ramp, bridge plate or other suitable means, handrails, stanchions, passenger seats, vehicle driver seat...
-
11B-101.1 General
Chapter 11B accessibility regulations are applicable to: 1) publicly funded buildings, structures, sidewalks, curbs and related facilities; 2) privately funded public accommodations and...
-
11B-504.4.1 Contrasting stripe
The stripe shall extend the full width of the step or upper approach and shall be of material that is at least as slip resistant as the other treads of the stair....
-
Space Needs
Subjects in general required more width (distance along the x-axis) than depth (distance along the y-axis) when performing transfers to this platform. ...
-
5.3.1 Permitted Obstructions to Transfer Sides for M301 and M302
The transfer surface shall be located to provide options to transfer from a mobility device onto one short side (depth) and one long side (width) of the surface....
-
5.4.1.2 Transfer and Positioning Support Location Recommendations for Imaging Equipment with Transfer Surfaces
This two-part recommendation recognizes the different use of the supports based on table width....
-
201.1 Scope
Rearranging them to provide sufficient clear widths to allow wheelchair maneuvering is one method of barrier removal and the required clear width to become accessible can be determined by...
-
402.1 General (Section-by-Section Analysis)
., case, style, height, width, stroke width, and spacing), as well as other characteristics relating to height above the floor, finish, contrast, protective coverings, brightness, and rate...
-
F235.2 Boat Slips
For example, a single pier 25 feet (7620 mm) long and 5 feet (1525 mm) wide (the minimum width specified by 1003.3) allows boats to moor on three sides....
-
235.2 Boat Slips
For example, a single pier 25 feet (7620 mm) long and 5 feet (1525 mm) wide (the minimum width specified by Section 1003.3) allows boats to moor on three sides....
-
What is an accessibility evaluation survey and when is one needed?
For example, doorways must be checked to see if they have at least 32 inches of "clear width."...
-
A4.17.3 Size and Arrangement
The 36 in (915 mm) width is necessary to achieve proper use of the grab bars; wider stalls would position the grab bars too far apart to be easily used and narrower stalls would position...
-
1018.1 General
The technical requirements address connections (1018.2); surface (1018.3); clear width (1018.4); obstacles (1018.5); openings (1018.6); slopes, including running slope (1018.7.1) and cross...
-
Study Limitations
For instance, two hand cyclists traveling abreast will require more path width than a solo hand cyclist....
-
III-4.4200 Readily achievable barrier removal
The Department's regulation contains a list of 21 examples of modifications that may be readily achievable: 1) Installing ramps; 2) Making curb cuts in sidewalks and entrances;...
-
R202 Alterations and Elements Added to Existing Facilities (Section-by-Section Analysis)
An accessible “path of travel” may consist of walks and sidewalks; curb ramps and other interior or exterior pedestrian ramps; clear floor paths through lobbies, corridors, rooms, and other...
-
240.2.2 Elevated Play Components
For purposes of this section, ramps, transfer systems, steps, decks, and roofs are not considered elevated play components....
