Where a seat is provided, the controls, faucets, and shower spray unit shall be installed on the back wall adjacent to the seat wall and shall be located 27 inches (685 mm) maximum from...
Search Results "Maximum Extent Practicable"
Filters
Commonly Searched Documents
-
608.5.2 Standard Roll-In Type Shower Compartments
-
9.2.2(7) Kitchens, Kitchenettes, or Wet Bars
Counter tops and sinks shall be mounted at a maximum height of 34 in (865 mm) above the floor....
-
4.10.14* EMERGENCY COMMUNICATIONS
The highest operable part of a two-way communication system shall be a maximum of 48 in (1220 mm) from the floor of the car....
-
Unified Facilities Guide Specifications
of surface irregularity is to be determined by placing the straightedge on the pavement surface and allowing it to rest on the two highest spots covered by its length and measuring the maximum...
-
[F] 907.4.2.2 Height
The maximum effort to activate controls shall be no greater than 5 pounds-force.◼...
-
11B-307.4 Vertical clearance
The leading edge of such guardrail or barrier shall be located 27 inches (686 mm) maximum above the finish floor or ground....
-
11B-705.1.2.3 Islands or cut-through medians
warnings at pedestrian islands or cut-through medians shall be 36 inches (914 mm) minimum in depth extending the full width of the pedestrian path or cut-through less 2 inches (51 mm) maximum...
-
11B-303.3 Beveled
Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (12.7 mm) high maximum shall be beveled with a slope not steeper than 1:2. Advisory 11B-303.3 Beveled....
-
11B-812.7.2 Marking
The area within the borderlines shall be marked with hatched lines a maximum of 36 inches (914 mm) on center....
-
11B-809.10.5.1 Clear floor space
The area under a lavatory, located at the control end of the tub, shall be permitted to encroach on the clear floor space provided the lavatory is 19 inches (483 mm) maximum in depth, and...
-
[F] 907.4.2.2 Height
The maximum effort to activate controls shall be no greater than 5 pounds-force. ◼...
-
Hager Companies 5200 Series - Heavy Duty Door Closer
These design features make this closer the ideal choice for doors with a maximum weight of 250 lbs....
-
Cavity Sliders USA Inc. Wall Mount Track
Maximum door thickness 2”....
-
Delta Round Front Toilet C41901-WH
Features and Benefits Delta toilets feature the exclusive SmartFit tank-to-bowl connection reducing potential leak points, over-tightening of the fasteners and cracking the toilet Maximum...
-
American Safety Tread Co., Inc. E- Cast Metal Safety Stair Nosing Style 816
Style Number: 816 Description: For poured concrete stairs Maximum length: 8' 0" in Alumacast and Feracast 3" wide for steps up to 10" deep Thickness: 5/16...
-
BEA Inc. EMR475 Series Door Access 4.75" Round Panther Plate (Push to Open)
entire surface area of the push plate Stainless steel finish is resistant to scratches & scuffing as well as rust Text and logo are abrasive etched onto the surface for maximum...
-
BEA Inc. EMS475 Series Door Access 4.75" Square Panther Plate (Push to Open)
entire surface area of the push plate Stainless steel finish is resistant to scratches & scuffing as well as rust Text and logo are abrasive etched onto the surface for maximum...
-
HEWI System Lignum Protect Handrails
They withstand maximum use and exposure, and are dimensionally stable....
-
5.8.2 Knee and Toe Clearance Recommendations under Breast Platform Recommendations
The depth of the wheelchair space shall include knee and toe clearance of 17 inches minimum and 25 inches maximum....
-
Sales and Service Counters
In addition to having a maximum height of 36 inches, all accessible sales and service counters must have a clear floor space in front of the accessible surface that permits a customer using...
-
Trailhead Information Signs [F216.13 and 1017.10]
signs must include the following information: Length of the trail or trail segment Type of trail surface Typical and minimum trail tread width Typical and maximum...
-
Transfer Sides (M301.2.3 and M302.2.3)
The Access Board is considering whether the final standards should permit equipment parts to extend horizontally 3 inches maximum beyond the edge of the transfer sides provided they do not...
-
1134A.5 Bathtubs
The area under a lavatory, located at the control end of the tub, may be included in the clear floor space provided the lavatory is 19 inches (483 mm) maximum deep, and the knee and toe...
-
T215 Communication Features
“Large transit entity,” which is a newly defined term in T103, refers to providers of public transportation services that “operat[e] . . . 100 or more buses in annual maximum service for...
