Signs can be on posts, or where feasible, on walls or suspended from ceilings (an 80” minimum headroom clearance is required at signs suspended above circulation paths (§307.4))....
Search Results "Latch Side Clearance"
Filters
Commonly Searched Documents
-
Identification [§216.5, §502.6]
-
Toilet Centerline
It is 19.5" from the side wall but I don't want to have to relocate plumbing or hire a contractor. ...
-
Pilot Rock AT Series Traditional A-Frame Picnic Table With Steel Braces - Using Recycled Plastic
The design meets or exceeds current ADA guidelines for wheelchair accessibility and provides for wheelchair access at both ends (30" wide, 27" under table top and 19" knee plus 5" toe clearances...
-
Hoyer Heavy-Duty Power Lift with Optional Scale
Description: Hoyer's Heavy-Duty Power Lift features a power operated base with a clearance of 4.5"....
-
Bradley Grab Bars 1 1/2" with Concealed Mounting 812
Return provides 1½" standard safety clearance between wall and bar....
-
PEMKO 5" Heavy Duty Threshold No. 1715
For 1715 thresholds, allow a 5/8 inch door clearance....
-
[2010 ADAS] 105.2.2 ASME
that at least two flat steps be provided at the entrance and exit of every escalator and that steps on escalators be demarcated by yellow lines 2 inches wide maximum along the back and sides...
-
[2010 ADAS] 105.2.2 ASME
that at least two flat steps be provided at the entrance and exit of every escalator and that steps on escalators be demarcated by yellow lines 2 inches wide maximum along the back and sides...
-
Access-Able Designs Shower Transfer Bench SH-400-2SDL
Left or right sided tops. Measures 32" W x 15" D x 22.5" D. Complies w/ ADA 4.21.3 when properly installed 5 year warranty....
-
Other Issues Relating to Seat Assignments
himself as a passenger with a disability and has requested a seat assignment to accommodate him, you must provide a bulkhead seat or other seat with more legroom than other seats on the side...
-
Accessible Medical Equipment
Have adjustable handrails and/or side rails D.5....
-
Best Practice Recommendations for Layout Planning
When possible, include both “horizontal” (side to side) and “vertical” (front to back) aisles to improve access and flow....
-
11B-704.4.1 Height
accessible telephone because the required 34 inches (865 mm) minimum keypad height can causes the highest operable part of the telephone, usually the coin slot, to exceed the maximum permitted side...
-
604.7 Dispensers
If toilet paper dispensers are installed above the side wall grab bar, the outlet of the toilet paper dispenser must be 48 inches (1220 mm) maximum above the finish floor and the top of...
-
5.8.1.2 Entry to Wheelchair Spaces on Raised Platforms
Ramps with drop offs ½ inch or greater shall provide edge protection 2 inches high minimum on each side....
-
R208.2 Where Not Required
required at cut-through pedestrian refuge islands that are less than 1.8 meters (6.0 ft) in length because detectable warning surfaces must extend 610 millimeters (2.0 ft) minimum on each side...
-
Orientation (slide 12)
But there are a lot of buildings where [separation is provided by] an area rug or a change of floor color: “that’s the furnished area that’s [the waiting area] right adjacent or to one side...
-
Areas of sport activity. (Section-by-Section Analysis)
In court sports, the accessible route would also have to directly connect both sides of the court. ...
-
402.2 Components
Accessible routes shall consist of one or more of the following components: walking surfaces with a running slope not steeper than 1:20, doorways, ramps, curb ramps excluding the flared sides...
-
A4.30.1 GENERAL
People can generally distinguish signage within an angle of 30 degrees of either side of the centerline of their face without moving their head....
-
III-7.5185 Automated teller machines
The ADAAG standard now in effect provides that ATM's must meet the requirements for both a forward and a side approach....
-
Calculation of Percentages
For example, for the location of wheelchair accessible water closets (16” – 18” centerline from side walls or partitions), specifying to the midpoint of the range (17”) will accommodate...
-
1.1.6 Flatness of walk cross slope
measurement is based on the assumption that most accessible exterior walks will be at least 60 in. (1525 mm) wide due to passing requirements and that users will tend to stay toward one side...
