For example, if an alteration project involves only installing pedestrian signals at existing intersections and there are no detectable warning surfaces on the curb ramps at the intersections...
Search Results "Ramp Surface"
-
Alterations to Existing Facilities
-
Path of Travel
(2) An accessible path of travel may consist of walks and sidewalks, curb ramps and other interior or exterior pedestrian ramps; clear floor paths through lobbies, corridors, rooms,...
-
Gaps: ADA Standard Section 1002.4.3
EXCEPTION: Where compliance is not operationally or structurally feasible, ramps, bridge plates, or similar devices complying with the applicable requirements of 36 CFR 1192.83(c) shall...
-
Location
Devices must be located a minimum of 3m (10 feet) apart, no more than 3m (10 feet) maximum from the curb line (and closer, if possible), and between the curb ramp landing and the outside...
-
General Tips
Keep a clipboard or other portable writing surface handy for people unable to reach the counter when signing documents....
-
Attachment E
All spaces and access aisles for persons with disabilities shall be flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and their surfaces shall be firm, stable...
-
R409.3 Continuity
Handrails shall be continuous within the full length of each ramp run or stair flight....
-
Master Your Timing in the Neon World of Space Waves
Early stages ease players into the mechanics, while later levels ramp up the speed and difficulty, pushing reflexes to their limits....
-
11B-1002.4.3 Gaps
Exception: Where compliance is not operationally or structurally feasible, ramps, bridge plates, or similar devices complying with the applicable requirements of 36 CFR 1192.83(c) shall...
-
11B-1002.4.3 Gaps
Exception: Where compliance is not operationally or structurally feasible, ramps, bridge plates, or similar devices complying with the applicable requirements of 36 CFR 1192.83(c) shall...
-
FIGURE INDEX
FIGURE INDEX Figure 104 Graphic Convention for Figures Figure 302.2 Carpet Pile Height Figure 302.3 Elongated Openings in Floor or Ground Surfaces Figure 303.2 Vertical Change...
-
Site Arrival Points: ADA Standard Section 206.2.1
Section 206.2.1 covers the scoping requirements for site arrival points of accessible routes in the most current ADA Standards.
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
- American Specialties Stainless Steel Surface Mounted Paper Cup Dispenser 0002-SM
- American Specialties Turbo-Dri Jr. Surface Mounted High-Speed Dryer 0198
- AJW Architectural Products U156 32 oz. Vertical Soap Dispenser - Surface Mounted
- American Specialties Surface Mounted Twin Hide-A-Roll Toilet Tissue Dispenser 0030
- Bradley Surface Mounted Stainless Steel Single Roll Toilet Tissue Dispenser 5084
- American Specialties Roval™ Collection Surface Mounted Paper Towel Dispenser 20210
- Bradley Surface Mounted Chrome Plated Single Roll Toilet Tissue Dispenser 508
- Bobrick MatrixSeries Surface-Mounted Multi-Roll Toilet Tissue Dispenser B-5288
- Bradley Surface Mounted Stainless Steel Dual Roll Toilet Tissue Dispenser 5234