Where possible, designers are encouraged to locate the ride seat no higher than 17 to 19 inches (430 to 485 mm) above the load and unload surface....
Search Results "Ramp Surface"
Commonly Searched Documents
-
11B-1002.5 Amusement ride seats designed for transfer
-
Contrast
Detectable warnings are required to contrast visually from adjacent walking surfaces, either light-on dark or dark-on-light....
-
11B-502.6 Identification
Signs shall be 60 inches (1524 mm) minimum above the finish floor or ground surface measured to the bottom of the sign. [2010 ADA Standards] 502.6 Identification....
-
Bobrick TrimLineSeries™ Surface-Mounted Napkin/Tampon Vendor 25₵, 50₵ and Free Operation B-370639
Requires the Premium User plan or above. (Login or upgrade your account!)
-
Bobrick ConturaSeries Surface-Mounted Paper Towel Dispenser/Waste Receptacle with TowelMate and LinerMate B-43699 Elevations
Requires the Premium User plan or above. (Login or upgrade your account!)
-
Excel Dryer, Inc. XLERATOR Hand Dryer High-Speed, Energy-Efficient Surface Mount, BMC White
Requires the Premium User plan or above. (Login or upgrade your account!)
-
ELKAY Filtered EZH2O® Mechanical Surface Mount with Battery-powered visual monitor LMASMB Front Elevation
Requires the Premium User plan or above. (Login or upgrade your account!)
-
ELKAY Filtered EZH2O® Mechanical Surface Mount with Battery-powered visual monitor LMASMB Side Elevation
Requires the Premium User plan or above. (Login or upgrade your account!)
-
Typical Issues
Curb ramp connects access aisle to the accessible route to the accessible entrance of the polling place. The access aisle may be at the street level or at sidewalk level....
-
11B-809.10.6.2 Slope
The floor surfaces shall be of Carborundum, grit-faced tile or of material providing equivalent slip resistance....
-
4.3.8 Changes in Levels
If an accessible route has changes in level greater than 1/2 in (13 mm), then a curb ramp, ramp, elevator, or platform lift (as permitted in 4.1.3 and 4.1.6) shall be provided that complies...
- AJW Architectural Products U1511EA Series Automatic ADA Compliant Hand Dryer, Universal Voltage - Surface Mounted
- AJW Architectural Products U593 1.6 Gallon Sanitary Napkin Disposal w/ Mounted Shelf - Surface Mounted
- AJW Architectural Products U103 33 oz. Single Cartridge ABS Liquid Soap Dispenser - Surface Mounted
- Bobrick B-30929 ClassicSeries® Surface-Mounted Toilet Tissue, Seat-Cover Dispenser and Waste Disposal
- Bobrick B-30919 ClassicSeries® Surface-Mounted Toilet Tissue, Seat-Cover Dispenser and Waste Disposal
-
Alterations
Where play components are altered and the ground surface is not, the ground surface does not have to comply with the ASTM F 1951-99 standard for accessible surfaces unless the cost of providing...
-
Public Rights-of-Way: ADA Standard Section 1.
While they address certain features common to public sidewalks, such as curb ramps, further guidance is necessary to address conditions and constraints unique to public rights-of-way....
-
What is slip resistance?
In fact, a truly non-slip surface could not be negotiated....
-
5. Conclusions
This study found that surface characteristics, more specifically surface roughness, can have a large impact on the WBVs that WC users are exposed to....
-
Clearances: ADA Standard Section 403.5
Section 403.5 covers the current ADA Standards for clearances on walking surfaces that are part of an accessible route.
-
Seat Location: ADA Standard Section 1009.2.2
The deck surface between the centerline of the seat and the pool edge shall have a slope not steeper than 1:48....
-
11B-1009.2.2 Seat location
The deck surface between the centerline of the seat and the pool edge shall have a slope not steeper than 1:48....
-
R310.3 Access Aisle
Curb ramps or blended transitions complying with R304 shall connect the access aisle to the pedestrian access route. Curb ramps are not permitted within the access aisle....