Additions [§202.2] Projects that increase, expand, or extend a facility’s gross floor area or height of a facility are considered additions (as defined in §106.5) and must comply with...
Search Results "Project"
Filters
Commonly Searched Documents
-
Additions [§202.2]
-
Exception 3
Additions or alterations to meet accessibility requirements consisting of one or more of the following items shall be limited to the actual scope of work of the project and shall not be...
-
Protruding Objects [§204]
Protruding Objects [§204] To prevent hazards to people with vision impairments, the standards limit the projection of objects into circulation paths....
-
68.102(a) Compliance with the Proposed Accessibility Guidelines for Pedestrian Facilities in the Public Right-of-Way
(a) For public right-of-way projects, in addition to accepting compliance with applicable TAS requirements, the department will also accept compliance with the Proposed Accessibility Guidelines...
-
11B-406.5.1 Location
Curb ramps and the flared sides of curb ramps shall be located so that they do not project into vehicular traffic lanes, parking spaces, or parking access aisles....
-
11B-406.5.1 Location
Curb ramps and the flared sides of curb ramps shall be located so that they do not project into vehicular traffic lanes, parking spaces, or parking access aisles....
-
11B-809.10.6.1 Size
A water closet shall be permitted to project 12 inches (305 mm) maximum into the opening provided that 36 inches (914 mm) minimum clear space is maintained between the water closet and the...
-
ALTERATION
Therefore, seismic retrofit projects, structural repair projects, and seismic retrofit projects for the purpose of compliance with the Structural Performance Category (SPC) requirements...
-
Conferences Audio, Conferences, Webinars and Web Courses
It is a project of the ADA National Network and is organized and run by the Great Plains ADA Center....
-
Remember
Information for this fact sheet came from the Office of Disability Employment Policy; the Media Project, Research and Training Center on Independent Living, University of Kansas, Lawrence...
-
R202.3 Alterations
Where existing elements, spaces, or facilities are altered, each altered element, space, or facility within the scope of the project shall comply with the applicable requirements for new...
-
4.9.3 Nosings
Nosings shall project no more than 1‒1/2 in (38 mm) (see Fig. 18)....
-
4.9.3 NOSINGS
Nosings shall project no more than 1-1/2 in (38 mm) (see Fig. 18)....
-
4.1.6(4)(d)
(i) Where existing elements prohibit strict compliance with the clearance requirements of 4.13.5, a projection of 5/8 in (16 mm) maximum will be permitted for the latch side door stop....
-
11B-404.2.4.3 Recessed doors and gates
approach shall be provided when any obstruction within 18 inches (457 mm) of the latch side at an interior doorway, or within 24 inches (610 mm) of the latch side of an exterior doorway, projects...
-
Designing Access Into the Outdoor Environment
Suppose you are assigned a project to reconstruct portions of a picnic area or to design a trail, but the work doesn't include any buildings....
-
General (R302.1) (Section-by-Section Analysis)
alterations where existing physical constraints make it impractical to fully comply with the technical requirements, compliance is required to the extent practicable within the scope of the project...
-
§100.85(c)(2)
prospective entry of persons of a particular race, color, religion, sex, familial status, or national origin, or with handicaps, can or will result in undesirable consequences for the project...
-
Exception 7
Projects consisting only of heating, ventilation, air conditioning, reroofing, electrical work not involving placement of switches and receptacles, cosmetic work that does not affect items...
-
1.3 General Exceptions
Exceptions: The code then provides general exceptions to the requirements in 11B-203.2 Many of these exceptions are applicable to public school, community college and higher education projects...
-
2. Typical Issues for People Who are Blind or Have Low Vision
Objects that are wall mounted, that project into a pedestrian route from the side, or that are overhead must be located so that individuals who are blind or have low vision will either detect...
-
Part 2. Typical Issues for Voters Who are Blind or Who Have Low Vision
Objects that are wall-mounted, that project into a pedestrian route from the side, or that are overhead must be located so that voters who are blind or who have a visual impairment will...
-
Bradley 18 Gallon Waste Receptacle 334
Model 334, 334-10, 334-11 Model 334 - Recessed (Waste container projects 8-3/4") - BradEX Model 334-10 - Semi-recessed (recesses 2"; projects 10-3/4") Model 334-...
-
Bradley 18 Gallon Waste Receptacle
Model 334, 334-10, 334-11 Model 334 - Recessed (Waste container projects 8-3/4") - BradEX Model 334-10 - Semi-recessed (recesses 2"; projects 10-3/4") Model 334-...
