Hemmed bottom and sides, requires 7 hooks (not included)....
Search Results "Hinge Side Clearance"
Commonly Searched Documents
- Bobrick Shower Curtain B-204.2
- Bobrick Shower Curtain B-204.3
- Magnuson Group 1000 Series Magazine Racks
-
Boat Slips: ADA Standard Section 235.2
Section 235.2 covers scoping requirements in the current ADA Standards for boat slips.
-
11B-221.2.3.2 Vertical dispersion
Vertical, center, or side aisles adjoining bleacher seating that are stepped or tiered are not considered entry points. ◼ Advisory 11B-221.2.3.2 Vertical dispersion Exception 2....
- Gamco Recessed Towel Dispenser - TD-3
- ASI Storage Solutions Traditional Plus Locker
-
Section H: Lifts
If a side door/gate is provided, is the clear opening width at least 42"? (§410.6) ...
-
406.7 Islands
Raised islands in crossings shall be cut through level with the street or have curb ramps at both sides....
-
Entry Points and Seats
Consider design features like open sides, back supports, and hand supports (right) to help facilitate easy transfer and access....
-
1003.2.12.2 Opening limitations
Exception: The triangular opening formed by the riser, tread and bottom rail at the open side of a stairway shall be of a maximum size such that a sphere of 6 inches (152mm) in diameter...
-
Clear Deck Space
This space must be located on the side of the seat opposite the water. The slope of the clear deck space must not be greater than 1:48 (2%)....
-
R305.1.4 Size
At curb ramps and blended transitions, detectable warning surfaces shall extend the full width of the ramp run (excluding any flared sides), blended transition, or turning space....
-
704.11.1 Parapet construction
Parapets shall have the same fire-resistance rating as that required for the supporting wall, and on any side adjacent to a roof surface, shall have noncombustible faces for the uppermost...
-
General [9.1.1]
Where room numbers are provided, they must be raised and Brailled and located on the wall at the latch-sides of doors for safety and uniformity....
-
11B-308.4 Suggested reach ranges for children
These dimensions apply to either forward or side reaches. ...
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
- Bradley 2-Stall Seat Cover/Tissue Dispenser & Napkin Disposal 5911
- Hager Companies Plastic International Symbol 364M
- Hager Companies Plastic International Symbol 364S
- Lynx Grills Inc. 36” Grill - 1 ProSear Burner & 2 Stainless Steel Burners (L600ADA)