A 180-degree turn is more appropriate as a basis for defining a minimum space bounded only on two sides and the individual has an open space to use along the axis of the turn....
Search Results "Side Transfer"
Filters
Commonly Searched Documents
-
4.3.5 Turning clearance
-
Toilet Room Configuration
This configuration provided room for a 5’ wheelchair turning radius as well as sufficient room for assistance on both sides of the toilet....
-
1.1.17 Stairs
For stairs with intermediate handrails take additional measurements approximately 15 in. (380 mm) on both sides of the intermediate handrail....
-
Chapter M3 Technical Criteria
technical criteria for accessible diagnostic equipment based on the patient positions that the equipment is designed to support, including equipment used by patients in a supine, prone, or side-lying...
-
BASIC INFORMATION
Instead, both sides agreed to a settlement. That way, they avoid the cost, delay, and uncertainty of a trial, and settlement benefits go to the Class Members....
-
Questions Posed in the NPRM Regarding Costs and Benefits of Complying With the 2010 Standards (Section-by-Section Analysis)
., side reach, water closet clearances in single-user toilet rooms with in-swinging doors, stairs, elevators, location of accessible routes to stages, accessible attorney areas and witness...
-
§ 38.83(b)(5) Platform barriers
Each side of the lift platform which extends beyond the vehicle in its raised position shall have a barrier a minimum 11/2 inches high....
-
11B-609.3 Spacing
grab bars complying with Section 11B-609.9 (Alternate Configuration) the space between the walls and the grab bar shall be 1½ inches (38 mm) minimum for a distance of 6 inches on either side...
-
§ 38.125(b)(5) Platform barriers
Each side of the lift platform which, in its raised position, extends beyond the car shall have a barrier a minimum 11/2 inches high....
-
11B-404.2.10 Door and gate surfaces
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
§ 38.23(b)(5) Platform barriers
Each side of the lift platform which extends beyond the vehicle in its raised position shall have a barrier a minimum 11/2 inches high....
-
§ 38.159(b)(5) Platform barriers
Each side of the lift platform which extends beyond the vehicle in its raised position shall have a barrier a minimum 11/2 inches (13 mm) high....
-
§ 38.95(b)(5) Platform barriers
Each side of the lift platform which, in its raised position, extends beyond the car shall have a barrier a minimum 11/2 inches high....
-
11B-404.1 General
A sign visible from the approach side complying with Section 11B-703.5 _|Signs; Visual Characters|_ shall be posted stating “Entry restricted and controlled by security personnel”. 2....
-
11B-609.3 Spacing
For L-shaped or U-shaped grab bars complying with Section 11B-609.9 the space between the walls and the grab bar shall be 1½ inches (38 mm) minimum for a distance of 6 inches on either side...
-
1010.1.9.8.1 Delayed egress locking system
An attempt to egress shall initiate an irreversible process that shall allow such egress in not more than 15 seconds when a physical effort to exit is applied to the egress side door hardware...
-
11B-404.2.10 Door and gate surfaces
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
Lavatories Adjacent to Partitions
space of the lavatory (see attached graphic) In California, we observe the additional requirement for lavatories that are located next to a wall (or partition): 11B-606.6 Adjacent side...
-
FAQ: How do I enter a New CAD/BIM File in my Corada WorkSpace?
. - Ramp Side Elevation) 'Upload drawing file' - Click the grey Choose file button to browse your computer for the file you wish to add....
-
Oasis Barrier-Free Universal Split-Level VersaCooler II P8ACSL
Removable side and front panels provide easy access for installation ADA Compliant when properly installed...
-
Delta Flush Valve Retrofit Electronic Washdown Urinal Valve DEMD-86405
Factory set at 0.5 gpm/1.9 lpm Retrofits into existing 86T505 installation Limited Faucet and Finish Warranty Model #: DEMD-86405 Number of handles: 0 With Side...
-
Delta Retrofit Electronic Washdown Urinal Valve DEMD-86415
Factory set at 0.5 gpm/1.9 lpm Retrofits into existing 86T505 installation Limited Faucet and Finish Warranty Model #: DEMD-86415 Number of handles: 0 With Side...
-
American Standard Colony PRO Two-Handle Kitchen Faucet with Low-Arc Swivel Spout 7074.500
This Colony PRO faucet is available with a handy side-spray to help you with a variety of daily kitchen tasks, and offered in polished chrome, the perfect accent to your home kitchen....
-
Delta Two Handle Centerset Lavatory Faucet 21C142
available in TUF-TECK cartridge (21T142) No lift rod hole Limited Faucet and Finish Warranty Model #: 21C142 2-hole 4″ installation Number of handles: 2 With Side...
