In the final rule, the maximum circular cross section has been changed from 1 ½ inches to 2 inches....
Search Results "Assurances from Contractors"
Filters
Commonly Searched Documents
-
Grab Bar Cross Sections
-
1115B.8.4
wall within 12 inches (305 mm) of the front edge of the toilet seat, mounted below the grab bar, at a minimum height of 19 inches (485 mm), and 36 inches (914 mm) maximum to the far edge from...
-
707.4 Privacy
Speech output users can benefit from an option to render the visible screen blank, thereby affording them greater personal security and privacy....
-
Notes
II The IDeA Center in its research defined wheelchair wheelbase as the distance from the center of the primary drive wheel to the center of the caster measured parallel to the floor....
-
6. Q: What if someone is demonstrating threatening behavior because of his or her disability?
But it is important that police officers are trained to distinguish behaviors that pose a real risk from behaviors that do not, and to recognize when an individual, such as someone who is...
-
Eunice Noell-Waggoner, IES, LC. Value, Contrast and Reflections
Reflective & Transparent Surfaces can be Dangerous Vertical Surfaces (slide 4) Two examples are shown of hazards from reflective and transparent vertical surfaces....
-
11. Covenant Not to Sue
The Parties agree that during the Compliance Period, the Releasing Parties will refrain and forbear from commencing, instituting, or prosecuting any lawsuit, action, or other proceeding,...
-
The Americans with Disabilities Act and Other Federal Laws Protecting the Rights of Voters with Disabilities
Yet for too long, many people with disabilities have been excluded from this core aspect of citizenship. ...
-
§35.130(b)(3) (Section-by-Section Analysis)
Paragraph (b)(3) prohibits the public entity from utilizing criteria or methods of administration that deny individuals with disabilities access to the public entity's services, programs...
-
1134A.5, Item 2
surrounding walls, grab bar reinforcement shall be located on each end of the bathtub, 32 inches to 38 inches (813 mm to 965 mm) above the floor, extending a minimum of 24 inches (610 mm) from...
-
E. Chapter 4: Boarding and Alighting
which sets forth the technical requirements for ramps and bridgeplates, accessible means of level boarding and alighting, lifts, and steps, has been significantly reorganized and revised from...
-
1134A.7, Item 1
The centerline of the water closet shall be 17 inches (432 mm) minimum to 18 inches (457 mm) maximum from a grab bar wall or partition....
-
Temporary Solutions for Election Day - Hallways and Corridors - Voters Who are Blind or Who Have Low Vision
Day Hallways and Corridors - Voters Who are Blind or Who Have Low Vision Problem One: Wall-mounted display case is a protruding object hazard because it is more than 4 inches from...
-
Obligations of the Department
In order to assist the Board with its obligations under the ADA, the Department has provided the Board with information from the Department's March and November 2016 reviews of the...
-
ACTIONS TO BE TAKEN BY AJM LAW
AJM Law will not exclude persons with disabilities from participation in or deny them the benefits of full and equal enjoyment of the goods, services, facilities, privileges, advantages...
-
Height
Although OWP&P did not deviate from ADAAG, the intent was to account for the reduced stature of many older adults as well as to optimize their potential leverage....
-
IV. Program Access
State and local governments-- Must ensure that individuals with disabilities are not excluded from services, programs, and activities because buildings are inaccessible....
-
FAQ: How do I access the 2010 ADA Standards?
From the home page, click on the "2010 ADA Standards" button in the top navigation or click here. This will take you to a page where you can browse the chapters of the Standards....
-
1134A.5, Item 2
surrounding walls, grab bar reinforcement shall be located on each end of the bathtub, 32 inches to 38 inches (813 mm to 965 mm) above the floor, extending a minimum of 24 inches (610 mm) from...
-
Clearance Around Base (M301.4.2 and M302.4.2)
M301.4.2 and M302.4.2 would require the base of the equipment to provide a clearance 6 inches high minimum measured from the floor and 36 inches deep minimum measured from the edge of the...
-
Section 810.2.2
., there is less than 96 inches of perpendicular space available from the curb or roadway edge, because of buildings or terrain features)....
-
II-3.1000 General
Public entities should be familiar with those regulations from their experience in applying for Federal grant programs....
-
Guldmann GH1 F Lifting Module
GH1 F - a flexible, self-installing ceiling lift The GH1 F – is a flexible lifting module that is easy to move from one room to another by means of the belonging transport and storage...
-
QUANTUM
DRIVER CONTROL - QUANTUM lets drivers stay focused on the road and gives them the flexibility to manage wheelchair securement from dashboard controls at their seat....
