Transitions from ramps to walks, gutters, or streets shall be flush and free of abrupt changes....
Search Results "Assurances from Contractors"
-
4.7.2 SLOPE
-
Door Closing Speed Tool
Click HERE to order this tool from the Corada Shop....
-
M302.2.1 Height
The height of the transfer surface during patient transfer shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured from the floor to the top of the transfer surface....
-
M301.2.1 Height
The height of the transfer surface during patient transfer shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured from the floor to the top of the transfer surface....
-
Sides of Curb Ramps [§406.3]
Sides of Curb Ramps [§406.3] Curb ramps can have returned sides, but a top landing is required under all conditions to allow maneuvering to and from the run....
-
I. Relief for Aggrieved Persons:
individuals, Peter Berg and Yvonne Hengesbaug, with (4) tickets for accessible or companion seats to any five (5) events, subject to availability, at The Palace that occur within three (3) years from...
-
§ 35.130(b)(8)
(8) A public entity shall not impose or apply eligibility criteria that screen out or tend to screen out an individual with a disability or any class of individuals with disabilities from...
-
§ 38.113(a)(1)
(1) At least one doorway, on each side of the car from which passengers board, of each car required to be accessible by §38.111(a) and where the spaces required by §38.111(d) of this part...
-
§ 37.123(e)(1)
including a vision impairment), and without the assistance of another individual (except the operator of a wheelchair lift or other boarding assistance device), to board, ride, or disembark from...
-
11B-605.2 Height and depth
Urinals shall be 131/2 inches (343 mm) deep minimum measured from the outer face of the urinal rim to the back of the fixture....
-
SECTION 1012 RAMPS
[DSA-AC] In addition to the requirements of this section, means of egress, which provide access to, or egress from, buildings or facilities where accessibility is required for applications...
-
11B-502.6.3 Location
A parking space identification sign shall be visible from each parking space....
-
11B-802.3.1 Alignment
The shoulder alignment point of the wheelchair space shall be measured 36 inches (914 mm) from the front of the wheelchair space....
-
11B-802.3.1 Alignment
The shoulder alignment point of the wheelchair space shall be measured 36 inches (914 mm) from the front of the wheelchair space....
-
11B-707.6.1 Input controls
Where membrane keys are the only method of input, each shall be tactilely discernible from surrounding surfaces and adjacent keys....
-
SECTION 1014 HANDRAILS
[DSA-AC] In addition to the requirements of this section, means of egress, which provide access to, or egress from, buildings or facilities where accessibility is required for applications...
-
11B-502.6.3 Location
A parking space identification sign shall be visible from each parking space....
-
SECTION 1012 RAMPS
[DSA-AC] In addition to the requirements of this section, means of egress, which provide access to, or egress from, buildings or facilities where accessibility is required for applications...
-
1018.2 Aisles in assembly spaces
[DSA-AC] In addition to the requirements of this section, means of egress, which provide access to, or egress from, buildings or facilities where accessibility is required for applications...
-
Toilet Compartment Access
Doors shall be located in the front partition or in the side wall or partition farthest from the water closet....
-
M301.4.1 Clearance in Base (Section-by-Section Analysis)
The MDE NPRM proposed a clearance in the base of 44 inches wide minimum, 6 inches high minimum measured from the floor, and 36 inches deep minimum measured from the edge of the examination...
-
Compliance date
A substantial number of commenters advocated a minimum of 18 months from publication of the final rule to the effective date for application of the standards to new construction, consistent...
-
Section 36.208 Direct Threat (Preamble, Section-by-Section Analysis)
This section is unchanged from the proposed rule. The Department received a significant number of comments on this section....
-
Compliance date. (Section-by-Section Analysis)
A substantial number of commenters advocated a minimum of 18 months from publication of the final rule to the effective date for application of the standards to new construction, consistent...