Grab bars shall be installed in a horizontal position, 33 inches (840 mm) minimum and 36 inches (915 mm) maximum above the finish floor measured to the top of the gripping surface, except...
Search Results "Check Writing Surface"
Filters
Commonly Searched Documents
-
609.4 Position of Grab Bars
-
Folding Seats on Equipment Used by Patients Seated in a Wheelchair (M302.4 Exception)
However, the folding seat would be required to meet the other technical criteria in M302 for transfer surfaces and supports. Question 28....
-
11B-405.9.2 Curb or barrier
, or barrier shall be provided that prevents the passage of a 4 inch (102 mm) diameter sphere, where any portion of the sphere is within 4 inches (102 mm) of the finish floor or ground surface...
-
11B-405.9.2 Curb or barrier
or barrier shall be provided that prevents the passage of a 4-inch (102 mm) diameter sphere, where any portion of the sphere is within 4 inches (102 mm) of the finish floor or ground surface...
-
Re: 404.2.6 Doors in Series and Gates in Series
I think I heard that explanation from discussions with some of the old-timers/access pioneers involved with writing ANSI A117.1-1980, UFAS, and the 1984 CBC where the requirement first appeared...
-
Trail Construction and Maintenance Notebook - 2007 Edition
Why write another trail construction and maintenance guide? Good question....
-
CURB CUT
An interruption of a curb at a pedestrian way, which separates surfaces that are substantially at the same elevation....
-
11B-705.1.1 General
Detectable warnings shall consist of a surface of truncated domes and shall comply with Section 11B-705....
-
GRADE BREAK
[DSA-AC] The line where two surface planes with different slopes meet....
-
903.7 Wet Locations
Where installed in wet locations, the surface of the seat shall be slip resistant and shall not accumulate water....
-
11B-903.7 Wet locations
Where installed in wet locations, the surface of the seat shall be slip resistant and shall not accumulate water....
-
903.7 Wet Locations
Where installed in wet locations, the surface of the seat shall be slip resistant and shall not accumulate water....
-
705.1 General
Detectable warnings shall consist of a surface of truncated domes and shall comply with 705....
-
TRANSITION PLATE
[DSA-AC] A sloping pedestrian walking surface located at the end(s) of a gangway....
-
B7. Curb Ramp Width
Is the width of the curb ramp surface at least 36 inches? [ADA Stds 4.7.3] Yes _____ No _____...
-
4.1.2(3)
(3) All objects that protrude from surfaces or posts into circulation paths shall comply with 4.4....
-
Minimum Trail Width
The width of the trail tread and the adjacent usable surface at the narrowest point on a trail. ...
-
4.1.1(3)
(3) All objects that protrude from surfaces or posts into circulation paths shall comply with 4.4....
-
4.32.1 MINIMUM NUMBER
Fixed or built-in seating, tables, or work surfaces required to be accessible by 4.1 shall comply with 4.32....
-
Tent Platform
An outdoor space designed and constructed for setting-up and securing tents that is elevated above the ground surface....
-
11B-903.7 Wet locations
Where installed in wet locations, the surface of the seat shall be slip resistant and shall not accumulate water....
-
11B-705.1.1 General
Detectable warnings shall consist of a surface of truncated domes and shall comply with Section 11B-705....
-
11B-903.7 Wet locations
Where installed in wet locations, the surface of the seat shall be slip resistant and shall not accumulate water....
-
PLACE OF PUBLIC ACCOMMODATION
basis; (3) Availability of housekeeping or linen service; and (4) Acceptance of reservations for a guest room type without guaranteeing a particular unit or room until check-in...
