A shared use path is a multi-use path that is designed primarily for use by pedestrians and bicyclists for transportation and recreational purposes....
Search Results "Designed Theaters"
Filters
Commonly Searched Documents
-
Shared Use Paths
-
Outdoor Conditions [4.8.8]
Exterior ramps must be designed so that water does not accumulate on the ramp or landing surface. A slope up to 2% is allowed at landings for adequate drainage....
-
Measuring Opening Force
While there are instruments specifically designed for this purpose (e.g., tensionometer), a device as simple as a spring-loaded plunger or "fish" scale is effective in measuring the force...
-
Equivalent Facilitation [2.2]
This provides flexibility for new technologies and innovative designs solutions that may not have been taken into account when ADAAG was developed....
-
Definitions
“Accessible on Election Day” means that a polling place is compliant with the 2010 ADA Standards for Accessible Design (“2010 Standards”) on Election Day, whether such compliance is...
-
Rotational Penetrometer
The Rotational Penetrometer, developed by Beneficial Designs, uses a wheelchair caster placed on a spring loaded caliber in a metal tripod frame which suspends the caster about 6 inches...
-
On-Site Readers
If this happens, designate people to serve as on-site readers....
-
Three Additional Features for Van-Accessible Parking Spaces
(plan drawing showing a van-accessible parking space with a 96 inch wide designated parking space, a 96 inch wide min. marked access aisle and the following notes) Sign with...
-
Accessible Parking Spaces
When a business restripes a parking lot, it must provide accessible parking spaces as required by the ADA Standards for Accessible Design....
-
Research Projects
The Board’s research program is focused on the study of accessibility relating to architecture and design, communication, and transportation....
-
1607A.8.2 Grab bars, shower seats and dressing room bench seats
Grab bars, shower seats and dressing room bench seat systems shall be designed to resist a single concentrated load of 250 pounds (1.11 kN) applied in any direction at any point on the grab...
-
11B-803.1 General
Partitions and doors should be designed to ensure people using accessible dressing and fitting rooms privacy equivalent to that afforded other users of the facility....
-
11B-803.1 General
Partitions and doors should be designed to ensure people using accessible dressing and fitting rooms privacy equivalent to that afforded other users of the facility....
-
1010.1.9.1 Hardware
These design requirements for door handles, pulls, latches, locks and other operating devices, intended for use on required means of egress doors in other than Group R and M occupancies...
-
Interdisciplinary Communication and Vocabulary
think is so exciting about where he’s going with this is addressing a little bit of the gap analysis that we talked about yesterday, that the physics in terms of parameters that we can design...
-
2.5 Physical Accessibility.
The design and construction of new buildings and the alterations and the necessary structural modifications to existing buildings must comply with accessibility standards under Title II...
-
CS SofStop Pocket Door Kit
The CS SofStop™ pocket door kit is a smooth running, soft closing system designed specifically for pocket doors....
-
Savaria ORION Limited Use/Limited Application Elevator Video
The Orion elevator is designed with features you would expect in a high-rise elevator but built for commercial low-rise buildings. ...
-
Patriot Portable Lift by Aqua Creek Products
The Patriot lift is designed with a weight capacity of 450lbs (204 kg) for most pool configurations for water drafts up to 6″ deep....
-
Restaurants and Cafeterias: ADA Standard Section 206.2.5
Section 206.2.5 covers scoping requirements in the most current ADA Standards for accessible routes in restaurants and cafeterias
-
General Holding Cells and General Housing Cells: ADA Standard Section 232.2
Section 232.2 covers scoping requirements in the current ADA Standards for general holding cells and general housing cells.
-
Shared Use Paths: ADA Standard Section 2.
They also differ from trails because they are designed not just for recreation purposes but for transportation as well....
-
11B-216.12 Amusement rides
Amusement rides designed primarily for children, amusement rides that are controlled or operated by the rider, and amusement rides without seats, are not required to provide wheelchair spaces...
-
Intent
for Public Accommodations and Commercial Facilities) and the 2004 Americans with Disabilities Act Accessibility Guidelines, collectively known as the "2010 ADA Standards for Accessible Design...
