However, when a design slope of 1:12 is indicated a tolerance of +0.5% is reasonable. Many accessibility experts consider a 2% cross slope to be the maximum....
Search Results "Floor Destination Indicator"
Filters
Commonly Searched Documents
-
1.2.5 Ramps
-
1004 Exercise Machines
This section requires clear floor space for transfer to, or use of, exercise machines....
-
Addition
An expansion, extension, or increase in the gross floor area or height of a building or facility....
-
106.5.3 Addition
An expansion, extension, or increase in the gross floor area or height of a building or facility....
-
AJW Architectural Products U125 45 oz. Horizontal Liquid Soap Dispenser - Surface Mounted
Product Features Fabricated of #20 gauge stainless steel with #4 satin finish A refill indicator displays remaining product Holds 45 fl oz. of liquid soap or hand sanitizer Product...
-
1. Covered Entities
operated by commuter carriers as many individuals who use medical oxygen fly on commuter carriers from small regional airports to larger airports to connect to a flight to their ultimate destination...
-
307.4 Vertical Clearance
The leading edge of such guardrail or barrier shall be located 27 inches (685 mm) maximum above the finish floor or ground....
-
9.5.1 New Construction
EXCEPTION: Where elevators are not provided as allowed in 4.1.3(5), accessible amenities are not required on inaccessible floors as long as one of each type is provided in common areas on...
-
9.4 POST OFFICE BOXES
Accessible post office boxes shall be located in the second or third set of modules from the floor, approximately 12 in to 36 in (305 mm to 915 mm) above the finished floor....
-
Rockwood Manufacturing Company 622 UL Listed 190˚ Door Viewer For Doors 1-3/8" to 2-1/8"
The base metal is indicated in the Specs folder. All available finishes for this item are listed at right....
-
Rockwood Manufacturing Company 619 UL Listed 160˚ Door Viewer For Doors 11/16" to 1-1/16"
The base metal is indicated in the Specs folder. All available finishes for this item are listed at right....
-
Delta Electronic Lav with Mixer NS DEMD-311LF
Electronic Lav with Mixer, NS Model #: DEMD-311LF Number of handles: 0 With Side Sprayer: No Valve Type: Electronic Flow Rate: 0.50 gpm @ 60 psi, 1.9 L/min @ 414 kPa Red/Blue Indicator...
-
Allen Tel ADA Outdoor Phones for Hearing Impaired Single Number Dial
Handset with 29 inch armored cord and amplified receiver Braille labeling and ID tones Two LED lamps to indicate "on" and "help on the way" Outdoor speakerphones not recommended for...
-
Delta Electronic Lavatory NS DEMD-301LF
Electronic Lavatory, NS Model #: DEMD-301LF Number of handles: 0 With Side Sprayer: No Valve Type: Electronic Flow Rate: 0.50 gpm @ 60 psi, 1.9 L/min @ 414 kPa Red/Blue Indicator...
-
How to Use the 2010 ADA Standards PDF Pocket Guide
Learn how to use the 2010 ADA Standards PDF Pocket Guide
-
4. Desk with knee and toe space
Desk with knee and toe space and clear floor space for front approach....
-
Addition
An expansion, extension, or increase in the gross floor area or height of a building or facility....
-
5.3.2.2 Surface
The surface of the turning space and clear floor or ground space shall be firm and stable....
-
6b.
Is the change in level from the floor to the lift surface ramped or beveled? Yes _____ No _____...
-
604.8.1.4 Toe Clearance
The front partition and at least one side partition shall provide a toe clearance of 9 inches (230 mm) minimum above the finish floor and 6 inches (150 mm) deep minimum beyond the compartment-side...
-
604.7 Dispensers
The outlet of the dispenser shall be 15 inches (380 mm) minimum and 48 inches (1220 mm) maximum above the finish floor and shall not be located behind grab bars....
-
404.2.3 Clear Width
There shall be no projections into the required clear opening width lower than 34 inches (865 mm) above the finish floor or ground....
-
604.8.1.4 Toe Clearance
The front partition and at least one side partition shall provide a toe clearance of 9 inches (230 mm) minimum above the finish floor and 6 inches (150 mm) deep minimum beyond the compartment-side...
-
404.2.3 Doorways - Clear Width
There shall be no projections into the required clear opening width lower than 34 inches (865 mm) above the finish floor or ground....
