Queues and waiting lines servicing counters or check-out aisles required to comply with 904.3 or 904.4 shall comply with 403. New...
Search Results "Pick-Up Counter"
-
227 Sales and Service
-
A5.1 General
Dining counters (where there is no service) are typically found in small carry-out restaurants, bakeries, or coffee shops and may only be a narrow eating surface attached to a wall....
-
Balco FMS-A Roll-Up Floor Mat Section
Requires the Premium User plan or above. (Login or upgrade your account!) -
Wheelchair Accessible Telephones: ADA Standard Section 217.2
Section 217.2 covers scoping requirements in the current ADA Standards for wheelchair accessible telephones.
-
Maintaining Accessibility in Museum Shops
Sales and ticket counters that have been lowered to provide access must be clear and unobstructed for use by people with disabilities....
-
11B-812.6 Vehicle spaces
Vehicle spaces serving van accessible, standard accessible, ambulatory and drive-up EVCS shall be 216 inches (5486 mm) long minimum and shall comply with Sections 11B-812.6.1 through 11B...
-
11B-812.6 Vehicle spaces
Vehicle spaces serving van accessible, standard accessible, ambulatory and drive-up EVCS shall be 216 inches (5486 mm) long minimum and shall comply with Sections 11B-812.6.1 through 11B...
-
Audible Signals: ADA Standard Section 407.2.2.3
Section 407.2.2.3 covers the current ADA Standards for elevator audible signals.
-
11 [§ 4.7.6]
11 [§ 4.7.6] A built-up curb ramp typically consists of asphalt or concrete that is poured and shaped into a ramp that runs at a 90-degree angle away from an intact curb down to the roadway...
-
Height: ADA Standard Section 902.4.2
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (760 mm) maximum above the finish floor or ground....
-
Spy City Café
g The height of the main cashier counter is 42" above the finished floor, exceeding the maximum allowable height of 36". See Standards § 7.2(1). h....
-
1133A.4.1, Item 1
1. Sinks and work surfaces required by Section 1133A.4 shall be designed to enable repositioning to a minimum height of 28 inches (711 mm).
-
10.4.1(3)
(3) Ticketing areas shall permit persons with disabilities to obtain a ticket and check baggage and shall comply with 7.2.
-
1133A.4.1, Item 1
1. Sinks and work surfaces required by Section 1133A.4 shall be designed to enable repositioning to a minimum height of 28 inches (711 mm).
-
Balco FMS-A Roll-Up Floor Mat with Aluminum Frame Section
Requires the Premium User plan or above. (Login or upgrade your account!) -
Vertical Clearance: ADA Standard Section 503.5
Section 503.5 covers the current ADA Standards for the vertical clearance at passenger loading zones.
-
Vanity Counter Top Space: ADA Standard Section 806.2.4.1
If vanity counter top space is provided in non-accessible guest toilet or bathing rooms, comparable vanity counter top space, in terms of size and proximity to the lavatory, shall also be...
-
1012.4 Surface
This section requires the surface of parking spaces and pull-up spaces to be firm and stable....
-
Design Opportunity
vanity using the stock bracket and dimensions shown in section view may not provide the required minimum 8" deep knee clearance at 27" AFF under the vanity top (306) while keeping the counter...
-
11B-217.2 Wheelchair accessible telephones
Exception: Drive-up only public telephones shall not be required to comply with Section 11B-217.2....
