The maximum permitted height for operable parts is consistent with Section 308 of this document. The standard also addresses attendant operation....
Search Results "Closer Height"
-
ASME
-
Accessible Route to Dumpster and Enclosure
This would trigger: a level area outside the gate to accommodate the door maneuvering clearance, operable door/gate hardware, clear width at doorway, and compliant closer speed...
-
EVAC+CHAIR® 600H Stair Evacuation Chair with Lift Handles
Width: 23" Folded Size: Height = 47" Depth = 12" Width = 23" Weight: 24 lbs...
-
EVAC+CHAIR® 300H (MK-4) Evacuation Chair
Height = 41" Depth = 8" Width = 20" Weight: 19 lbs...
-
Pilot Rock WPTS Square Frame Table Using Recycled Plastic
Nominal seat height is 18". The 8 ft. tables are ADA COMPLIANT....
-
Guardian Barrier-Free Eyewash: Deck Mounted, AutoFlow™ 90º Swing-Down GBF1849
ADA compliance is dependent on 27” knee clearance under counter and 34” maximum counter height. Spray heads swing down from storage to operational position, activating water flow....
-
Allegion Falcon 2390 Series Recessed Exit Device
Rod length requirement varies with device mounting height....
-
Excel Dryer, Inc. XLERATOR® Hand Dryers
Solution Over a Decade of Proven Performance Virtually Maintenance Free Specifications Dimensions: Width 11 3/4" (298 mm) Height...
-
Allegion Falcon 1590 Series Exit Devices
Pushbar height is 3" Stile: 2" minimum Electric Functions: EL - electric latch retraction, include "S". Requires PS873-2 minimum power supply....
-
Pilot Rock WPTS Square Frame Table Using Lumber
Nominal seat height is 18". The 8 ft. tables are ADA COMPLIANT....
-
AJW Architectural Products UG130-Railing UG130X-Y108 108" Exposed Flange, 1.5" Diameter Grab Bar, Peened Grip - Configuration Y
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
AJW Architectural Products UG3-Railing UG3X-Y108 108" Concealed Snap Flange, 1.5" Diameter, Peened Grip - Configuration Y
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
AJW Architectural Products UG120-Railing UG120X-Y108 108" Exposed Flange, 1.25" Diameter, Peened Grip - Configuration Y
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
Bosch Power Tools - GPL-3 3 Point Laser
add squaring to plumb, level and align capabilities One-person does the job of two people using manual plumb bob In-track design makes unit easy to move, maintains right height...
-
Pilot Rock WPTS Square Frame Picnic Table Using Formed Steel Channel
Nominal seat height is 18". The 8 ft. tables are ADA COMPLIANT....
-
Pilot Rock WPTS Square Frame Table Using Aluminum
Nominal seat height is 18". The 8 ft. tables are ADA COMPLIANT....
-
GE® 30" Drop-In Electric Range JDS28DFWW
30 in Net Weight 116 lb Oven Interior Dimensions (W x H x D) (in.) 24 x 17-1/2 x 18-1/4 Overall Depth 28 1/2 in Overall Height...
-
Symmetry Vertical Platform Lift VPC-SL
Standard Features: 750 lb capacity Speed: 10 FPM with a 1HP, 115V motor Lifting height: up to 168” Steel constructed with electrostatic, powder-coated finish...
-
AJW Architectural Products UG2-Railing UG2X-Y108 108" Concealed Snap Flange, 1.25" Diameter, Peened Grip - Configuration Y
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
AJW Architectural Products UG3-A Series UG3-A12 12" Concealed Snap Flange, 1.5" Diameter Grab Bar - Configuration A
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
AJW Architectural Products UG130-A Series UG130-A12 12" Exposed Flange, 1.5" Diameter Grab Bar - Configuration A
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
AJW Architectural Products UG30-Railing UG30X-Y108 108" Concealed Set Screw Flange, 1.5" Diameter, Peened Grip - Configuration Y
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
Activar Hiawatha 535/509/536/537 Solid 1 inch Diameter Pulls
• Plate & Pull Combinations • Standard Pulls • Push & Pull Bar Sets • Custom & Unique Pulls • Full Height Pulls • Door Protection Plates & Edges • Auto...
-
AJW Architectural Products UG20-Railing UG20X-Y108 108" Concealed Set Screw Flange, 1.25" Diameter, Peened Grip - Configuration Y
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
