(c) If you assign seats to passengers, but not until the date of the flight, you must use the “priority seating” approach of section 382.83(a)(2)....
Search Results "Seat Height"
-
§382.85(c)
-
§382.83(b)
(b) If you assign seats to passengers, but not until the date of the flight, you must use the “priority seating” approach of paragraph (a)(2) of this section....
-
§ 36.302(f)(6)(ii)
(ii) When all seating in a designated area in the facility has been sold and the accessible seating being released is in the same designated area; or...
-
§ 35.138(f)(2)
(2) When all seating in a designated area in the facility has been sold and the accessible seating being released is in the same designated area; or...
-
226 and 902 Dining Surfaces and Work Surfaces
Commenters stated that basing accessible seating on seating spaces and standing spaces potentially represents a significant increase in scoping, particularly given the ambiguity in what...
-
11B-802.1.3 Depth
Consideration should be given to the alignment of the wheelchair space and the adjacent companion seat which may require the rear tires of the wheelchair to project behind the back of the...
-
11B-604.6 Flush controls
If plumbing valves are located directly behind the toilet seat, flush valves and related plumbing can cause injury or imbalance when a person leans back against them....
-
11B-604.6 Flush controls
If plumbing valves are located directly behind the toilet seat, flush valves and related plumbing can cause injury or imbalance when a person leans back against them....
-
11B-802.1.3 Depth
Consideration should be given to the alignment of the wheelchair space and the adjacent companion seat which may require the rear tires of the wheelchair to project behind the back of the...
-
F219.3 Receivers
Where all seats in an assembly area are served by an induction loop assistive listening system, the minimum number of receivers required by Table F219.3 to be hearing-aid compatible shall...
-
11B-224.8.2 More than 50-bed facilities
Facilities with more than 50 beds that provide common use bathing facilities, shall provide at least one roll-in shower with a seat that complies with Section 11B-608....
-
11B-224.8.2 More than 50-bed facilities
Facilities with more than 50 beds that provide common use bathing facilities, shall provide at least one roll-in shower with a seat that complies with Section 11B-608....
-
Baby Devoro 1.28 gpf FloWise 10 Inch High Round Front Toilet Designed for children video
The Baby Devoro is easy to install and its ten-inch rim height and round front design makes it easy for small children to get on the toilet themselves. ...
-
Vertical Wheelchair Lifts
Vertical lifts are intended for people who use wheelchairs although others may be able to use them under the ASME code if a seat is provided....
-
§382.85(a)(2)(ii)
(ii) If such a passenger is assigned to a designated priority seat, he or she is subject to being reassigned to another seat as provided in §382.83(a)(2)(i) of this subpart....
-
4. On-board wheelchairs
The Foreign Carriers NPRM proposed that this requirement apply on aircraft with 50 or more seats, as distinct from the criterion of more than 60 seats in the existing regulation....
-
1134A.6, Item 5
When a threshold is used, it shall be a maximum of 2 inches (50.8 mm) in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from...
-
6.9 Tread Obstacles
Obstacles on beach access routes and their related resting intervals shall not exceed 1 inch (25 mm) in height measured vertically to the highest point....
-
1134A.6, Item 5
When a threshold is used, it shall be a maximum of 2 inches (50.8 mm) in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from...
-
11B-703.5.4 Character proportions
Characters shall be selected from fonts where the width of the uppercase letter “O” is 60 percent minimum and 110 percent maximum of the height of the uppercase letter “I”....
-
11B-703.2.4 Character proportions
Characters shall be selected from fonts where the width of the uppercase letter “O” is 60 percent minimum and 110 percent maximum of the height of the uppercase letter “I”....
-
11B-809.10.6.5 Thresholds
Where provided thresholds shall be 2 inches (51 mm) maximum in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from the horizontal...
-
1009.5.4 Transfer Steps
Transfer step height shall be 8 inches (205 mm) maximum....
-
903.4 Back Support
Back support shall be 42 inches (1065 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (455 mm) minimum above the seat...
