Those with leading edges that are within cane sweep (27” high maximum) or that provide minimum headroom clearance (80” minimum) do not pose hazards and can protrude any amount....
Search Results "Maximum Dimension"
-
Protrusion Limits [§307.2]
-
11B-303.3 Beveled
Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (12.7 mm) high maximum shall be beveled with a slope not steeper than 1:2....
-
§ 38.159(b)(8) Platform entrance ramp
The entrance ramp, or loading-edge barrier used as a ramp, shall not exceed a slope of 1:8, measured on level ground, for a maximum rise of 3 inches (75 mm), and the transition from roadway...
-
1607.8.2 Grab bars, shower seats and dressing room bench seats
room bench seat systems shall be designed to resist a single concentrated load of 250 pounds (1.11 kN) applied in any direction at any point on the grab bar or seat so as to produce the maximum...
-
11B-403.5.3 Passing spaces
An accessible route with a clear width less than 60 inches (1524 mm) shall provide passing spaces at intervals of 200 feet (60,960 mm) maximum....
-
1607.8.2 Grab bars, shower seats and dressing room bench seats
room bench seat systems shall be designed to resist a single concentrated load of 250 pounds (1.11 kN) applied in any direction at any point on the grab bar or seat so as to produce the maximum...
-
11B-703.4.2 Location
In this section, the term “wall space” refers to any type of partition assembly or adjacent surface of sufficient dimension where a sign can lay flat, including glass partitions or sidelites...
-
11B-703.4.2 Location
In this section, the term “wall space” refers to any type of partition assembly or adjacent surface of sufficient dimension where a sign can lay flat, including glass partitions or sidelites...
- Delta Single Handle Lavatory Faucet 551-DST
- Kompan, Inc. M7000 - Red House Playhouse
- Pilot Rock PWS-D019 Pet Waste Roll Bag Dispenser Using Bags on a Card
- Delta Elongated Toilet C43902-WH
- Symmons Metering Faucet without Temperature Selection S-61
- Verifone MX 915 Point of Sale Machine with Credit Card Reader
-
Summary of Significant Changes
For purposes of this requirement, a “large transit entity” is defined as a provider of public transportation that operates 100 or more buses in annual maximum service for all fixed route...
-
M307 Operable Parts
The Wheeled Mobility Anthropometry Project recommended that the 5 pounds maximum force be retained for other types of operable parts....
- Stanley Magic-Force™ Full or Low Energy Swing Door Operator
- Kawneer North America 190/350/500 Standard Entrances
- Guardian Barrier-Free WideArea™ Eye/Face Wash GBF1724
-
Alterations
When pools are altered, the alterations must comply with the 2010 Standards, to the maximum extent feasible....
-
303.3 Beveled
Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (13 mm) high maximum shall be beveled with a slope not steeper than 1:2. Advisory 303.3 Beveled....
-
403.5.3 Passing Spaces
An accessible route with a clear width less than 60 inches (1525 mm) shall provide passing spaces at intervals of 200 feet (61 m) maximum....
-
Accessible Routes
The accessible route must comply with ADAAG provisions for the location, width (minimum of 36 inches), passing space, head room, surface, slope (maximum of 1:12 or 8.33%), changes in level...
-
Accessible Routes
Accessible route requirements in ADAAG address width (minimum of 36 inches), passing space, head room, surface, slope (maximum of 1:12 or 8.33%), changes in level, doors, egress, and areas...