They withstand maximum use and exposure, and are dimensionally stable....
Search Results "Maximum Dimension"
-
HEWI System Lignum Protect Handrails
-
American Safety Tread Co., Inc. E- Cast Metal Safety Stair Nosing Style 816
Style Number: 816 Description: For poured concrete stairs Maximum length: 8' 0" in Alumacast and Feracast 3" wide for steps up to 10" deep Thickness: 5/16...
-
Hager Companies 5200 Series - Heavy Duty Door Closer
These design features make this closer the ideal choice for doors with a maximum weight of 250 lbs....
-
Categorization of wheelchair versus other power-driven mobility devices. (Section-by-Section Analysis)
A few commenters thought it would be appropriate to categorize the devices based on their maximum speed....
-
Tour-Mate
We believe that having clients own their own content provides them with the maximum flexibility to provide quality interpretation to their visitors across a variety of platforms....
-
Valley Association for Independent Living (VAIL) - McAllen, Laredo, TX
VAIL’s goal is to stimulate and promote a growing sense of personal dignity and empowerment through individualized programs designed to provide the tools necessary for maximum independence...
-
Easter Seals Serving DC | MD | VA
The shared resources created a maximum return on investment for the community....
-
Federal Elevator Serenus LULA Elevator
Plastic laminate ceiling with 4 potlights Stainless steel control panel and trim Automatic 2 speed doors (36″ X 80″ OR 36″ X 84″ Prime Coat) 30 fpm. (0.15 m/s) maximum...
-
229 Windows
Commenters generally supported this provision but some commenters asked whether the maximum five-pounds (5 lbs.) of force requirement of section 309 applies to the window latch itself or...
-
11B-303.3 Beveled
Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (12.7 mm) high maximum shall be beveled with a slope not steeper than 1:2. [2010 ADAS] Advisory 303.3 Beveled. ...
-
11B-1005.2.1 Height
At least 25 percent of the railings, guards, or handrails shall be 34 inches (864 mm) maximum above the ground or deck surface....
-
Pushbutton locator tone
The 2003 MUTCD requires that locator tone volume be carefully adjusted to be audible a minimum of 1.8 m (6 feet) and a maximum of 3.7 m (12 feet) from the pushbutton, or to the building...
-
M303.4.1 Breast Platform Adjustability (Section-by-Section Analysis)
The MDE NPRM proposed a mammography breast platform height range of 30 inches high minimum and 42 inches high maximum above the floor....
-
608.3.2 Standard Roll-In Type Shower Compartments
Grab bars shall be installed 6 inches (150 mm) maximum from adjacent walls....
-
405.9 Edge Protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of ½ inch (13 mm) maximum within 10 inches (255 mm) horizontally of the minimum landing area...
-
410.6 Doors and Gates
EXCEPTION: Platform lifts serving two landings maximum and having doors or gates on opposite sides shall be permitted to have self-closing manual doors or gates....
-
Accessible Routes
The accessible route must comply with ADAAG provisions for the location, width (minimum of 36 inches), passing space,head room, surface, slope (maximum of 1:12 or 8.33%), changes in level...
-
R304.5.3 Cross Slope
The cross slope of curb ramps, blended transitions, and turning spaces shall be 2 percent maximum....
-
405.9 Edge Protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of ½ inch (13 mm) maximum within 10 inches (255 mm) horizontally of the minimum landing area...
-
303.3 Beveled
Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (13 mm) high maximum shall be beveled with a slope not steeper than 1:2. Advisory 303.3 Beveled....
-
§104.34(a) Academic setting
recipient to which this subpart applies shall educate, or shall provide for the education of, each qualified handicapped person in its jurisdiction with persons who are not handicapped to the maximum...
-
Cross Slope and Surfaces [4.8.6]
The cross slope (2% maximum) must be minimized because it makes wheelchair travel difficult by distributing more weight and required force to one side and causing front casters to veer....
-
Counters and Bars [5.2]
Types of Counters Maximum Height Minimum Length Knee Clearance (forward approach) Dining/Bars (service) 34 in 60 in required Dining/Bars...
