Dimensions: H:11.75" E:3" W:2.25" Diffuser: White Opal Glass Finish: Aluminum Certification: ADA and cUL Options: Aluminum: 60W E26 Torpedo Incandescent: #13159 Aluminum:...
Search Results "Maximum Dimension"
- Celia 1 Indoor/Outdoor Sconce by Hampstead
-
405.2 Slope (Exception 2), 405.6 Rise (Exception)
The running slope of ramp runs must not be steeper than 1:12 and any ramp rise must be 30 inches maximum....
-
2.2.3 Functional Reach
Use of the electromechanical probe required manually digitizing the 3-D location of the maximum reach point after the cylinder was positioned (Figure 2‒3)....
-
4.3.8 Operating forces
For other types of operable parts, the upper limit for operating force should be retained at a maximum of 5 lbf (22 N) to accommodate 95% of the sample....
- Learning Disabilities Worldwide
-
Expert Report of James L.E. Terry, Evan Terry Associates, LLC (August 9, 2018)
Center, 12303 Sonnier Street, Houston, TX Parking: The surface slope in the designated accessible parking space and access aisle is not level in all directions and exceeds the maximum...
-
Executive Summary
Reference information is also often included on the characteristics of mobility devices like illustrations and dimensions of unoccupied or occupied wheelchairs....
- Verifone MX 915 Point of Sale Machine with Credit Card Reader
- Symmons Metering Faucet without Temperature Selection S-61
- Delta Elongated Toilet C43902-WH
-
M305.2.1 Location (Section-by-Section Analysis)
The Committee used a 24-inch dividing point for table width to accommodate the dimensions for the maximum reach range....
-
NFPA: ADA Standard Section 105.2.5
Section 105.2.5 of the ADA Standards cover references to the National Fire Protection Association (NFPA).
-
11B-502.4 Floor or ground surfaces
Accessible parking spaces and access aisles are required to be level (maximum 1:48 slope) in all directions to provide a surface for wheelchair transfer to and from vehicles....
-
11B-502.4 Floor or ground surfaces
Accessible parking spaces and access aisles are required to be level (maximum 1:48 slope) in all directions to provide a surface for wheelchair transfer to and from vehicles....
-
§382.9(e)(2)
(2) If you submit a waiver request after September 10, 2008, the Department will, to the maximum extent feasible, respond to the request by May 13, 2009 or within 180 days of receiving it...
-
1008.4.3 Play Tables
The tops of rims, curbs, or other obstructions shall be 31 inches (785 mm) high maximum....
-
307.4 Vertical Clearance
The leading edge of such guardrail or barrier shall be located 27 inches (685 mm) maximum above the finish floor or ground....
-
M302.4.1 Clearance in Base
Equipment components are permitted to be located within 8 inches (205 mm) maximum of the centerline of the clearance width....
-
M301.4.1 Clearance in Base
Components of diagnostic equipment are permitted to be located within 8 inches (205 mm) maximum of the centerline of the clearance width....
-
1607.8.2 Grab bars, shower seats and dressing room bench seats
room bench seat systems shall be designed to resist a single concentrated load of 250 pounds (1.11 kN) applied in any direction at any point on the grab bar or seat so as to produce the maximum...
-
1008.4.3 Play Tables
The tops of rims, curbs, or other obstructions shall be 31 inches (785 mm) high maximum....
-
703.4.1 Height Above Finish Floor or Ground
characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches (1525 mm) maximum...
-
407.2.1.4 Location
Responding cars are programmed for maximum efficiency by reducing the number of stops any passenger experiences....
-
407.2.1.4 Location
Responding cars are programmed for maximum efficiency by reducing the number of stops any passenger experiences....