Door secured to cabinet with a full-length stainless steel piano-hinge. Equipped with a tumbler lock keyed like other Gamco restroom accessories....
Search Results "Swing Clear Hinge"
Filters
Commonly Searched Documents
-
Gamco Surface Mounted Coverall Sanitary Napkin Disposal - ND-5
-
Bobrick Angle-Frame Two Position Tilt Mirror B-294 1630
Top of mirror tilts 7" (180mm) from wall with self-locking mechanisms; bottom of mirror mounts to wall with full-length stainless steel hinge....
-
Gamco Recessed Towel Dispenser and Waste Receptacle Combination - TW-6
EXTRA HEAVY 18-gauge (1.2mm) doors, warp-free, hung on continuous stainless steel piano-hinge, and fitted with tumbler locks....
-
ASI Storage Solutions Traditional Collection Locker
Stainless steel recessed handle for safety 16 gauge doors, frames and bottoms 24 gauge tops, sides, backs and shelves Continuous full-length staked piano hinge...
-
ASI Storage Solutions Competitor Locker
FEATURES: 2 mil powder coated in any of 15 designer colors Stainless steel recessed handle for safety 16 gauge bottom shelf for durability Continuous full-length staked piano hinge...
-
Protruding Objects [1017.9]
Objects that protrude into the trail clear tread width, passing spaces, and resting intervals can pose hazards to people who are blind or have low vision....
-
9. Remedial action
Paragraph (a)(3) also makes clear that handicapped persons who are not in the program at the time that remedial action is required to be taken may also be the subject of such remedial action...
-
11B-504.4.1 Contrasting stripe
Interior stairs shall have the upper approach and lower tread marked by a stripe providing clear visual contrast....
-
Personal Support:
*Think through how best to ask for help quickly [from people you may not know] and give clear instructions on the kind of help you will need. 2.1 * Practice giving quick, clear and quick...
-
Passing Spaces on Trails
A 60-inch (1,525-millimeter) clear tread width is required for two wheelchairs to pass safely and comfortably on a trail....
-
608.2.2 Standard Roll-In Type Shower Compartments
Standard roll-in type shower compartments shall be 30 inches (760 mm) wide minimum by 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides...
-
Basic Features
Careful planning and design will incorporate elements such as a wider entrance door, adequate clear floor space, appropriate placement and models of fixtures and furniture, and grab bars...
-
802.1.4 Approach
Because accessible routes serving wheelchair spaces are not permitted to overlap the clear floor space at wheelchair spaces, access to any wheelchair space cannot be through another wheelchair...
-
Define "task." (Section-by-Section Analysis)
The Department feels that the common definition of task is sufficiently clear and that it is not necessary to add the term to the definitions section; however, the Department has proposed...
-
Security Screening for Passenger with a Disability Same as for Other Passengers
You must not subject a passenger with a disability who possesses an aid used for independent travel to a special screening procedure if the passenger and the aid or assistive device clear...
-
306.3.3 Minimum Required Depth
Where knee clearance is required under an element as part of a clear floor space, the knee clearance shall be 11 inches (280 mm) deep minimum at 9 inches (230 mm) above the finish floor...
-
4.4.2 Head Room
Walks, halls, corridors, passageways, aisles, or other circulation spaces shall have 80 in (2030 mm) minimum clear head room (see Fig. 8(a))....
-
4.4.2 HEAD ROOM
Walks, halls, corridors, passageways, aisles, or other circulation spaces shall have 80 in (2030 mm) minimum clear head room (see Fig. 8(a))....
-
R409.10 Handrail Extensions
In alterations where handrail extensions would reduce the clear width required for pedestrian access routes, handrail extensions shall not be required....
-
4.34.3(2)(a) Reach Depth Not More Than 10 in
Where the reach depth to the operable parts of all controls as measured from the vertical plane perpendicular to the edge of the unobstructed clear floor space at the farthest protrusion...
-
Smooth Surface
Section 404.2.10 requires that swinging doors and gates have a smooth surface on the push side that extends their full width....
-
1117B.5.7
Mounting location shall be determined so that a person may approach within 3 inches (76mm) of signage without encountering protruding objects or standing within the swing of a door....
-
Ground Level Requirements Based on Elevated Play Components
The spring rider or swing can be used to meet the “one of each type” requirement and can also be used to meet the minimum number determined by Table 240.2.1.2. ...
-
Accessible Icon Project
Founded by Sara Hendren and Brian Glenney, the work started as a guerilla street art campaign: placing a clear-backed sticker on top of parking signs depicting the International Symbol of...
