In addition, clarification has been added that the dimensions for back support are measured from the surface of the seat. Comment....
Search Results "Maximum Dimension"
-
Back Support
-
Notes
Consequentially, health care professionals who are purchasing examination tables and chairs typically focus on the seated height dimension....
-
T602 Wheelchair Spaces
Because mobility devices vary widely in their respective dimensions and maneuverability, we note that it may be beneficial for transit operators to consider providing wheelchair spaces larger...
-
Single-User Toilet Rooms: Side Transfer Space
Where doors can swing out, the minimum room depth is typically determined by the lavatory depth and door clearances for forward approaches; (turning space is usually available within these dimensions...
-
Expert Report of John Rife Torkelson, theACCESSpartnership, L.P. (August 8, 2018)
Parking: The surface slope of the designated accessible van space exceeds the maximum slope allowed of 1:48 (1991 ADA Stds 4.6.3; 2010 ADA Stds 502.4)....
-
Guidelines for Requirement 7
The first set of specifications also includes size dimensions for shower stalls, but only when a shower stall is the only bathing facility provided in a dwelling unit....
-
3.0 Comparison of Research Methodologies
Both unoccupied and occupied dimensions of device width and length were measured as well as a set of other basic dimensions....
-
Magnuson Group SLOPE Waste Receptacles
standard height 38-gallon and a “junior height” 32-gallon unit, SLOPE features 3 single top openings [waste, recycling & paper] and 5 double-top openings [combinations of these] for maximum...
-
Seating Solutions ADA Platforms, Ramps & Stairs
requirements Modular designs allow us to build around obstacles on site All aluminum construction Code compliant 1:12 slope ramps ADA platforms designed for maximum...
-
Hussey Seating Company Flip-Up Armrest
Can be used for standard seating when maximum capacity is required....
-
11B-407.2.1.4 Location
Responding cars are programmed for maximum efficiency by reducing the number of stops any passenger experiences....
-
1009.2.1 Pool Lift Location
Where multiple pool lift locations are provided, no more than one pool lift shall be required to be located in an area where the water level is 48 inches (1220 mm) maximum....
-
§382.9(e)(3)
The Department will, to the maximum extent feasible, respond to such requests within 180 days of receiving them....
-
11B-1009.5.4 Transfer steps
Transfer step height shall be 8 inches (203 mm) maximum. The surface of the bottom tread shall extend to a water depth of 18 inches (457 mm) minimum below the stationary water level....
-
703.4.1 Height above Finish Floor or Ground
characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches (1525 mm) maximum...
-
M302.4.2 Clearance Around Base
The width of the base permitted within this clearance shall be 26 inches (660 mm) wide maximum at the edge of the examination surface and shall be permitted to increase at a rate of 1 inch...
-
M301.4.2 Clearance Around Base
The width of the base permitted within this clearance shall be 26 inches (660 mm) wide maximum at the edge of the examination surface and shall be permitted to increase at a rate of 1 inch...
-
403.5.3 Passing Spaces
An accessible route with a clear width less than 60 inches (1525 mm) shall provide passing spaces at intervals of 200 feet (61 m) maximum....
-
307.4 Vertical Clearance
The leading edge of such guardrail or barrier shall be located 27 inches (685 mm) maximum above the finish floor or ground....
-
Technical Memorandum TM 2012-06 Wading Pools
will defer to the following definition contained in the Texas Administrative Code, Title 25, Part 1, §265.182(157) based on 201.1: 265.182 (157) Wading Pool – A Class D pool that has a maximum...
-
5.8.2.7 Base Support Allowance
Base supports can be a maximum of 1½ inches high....
-
Gripping Surface Cross Section and Clearances M301, M302, and M305.2
The transfer supports shall be located at a maximum distance from transfer surface of 1 ½ inches....
-
R305.2.5 Pedestrian At-Grade Rail Crossings
The edge of the detectable warning surface nearest the rail crossing shall be 1.8 m (6.0 ft) minimum and 4.6 m (15.0 ft) maximum from the centerline of the nearest rail....
-
1009.5.4 Transfer Steps
Transfer step height shall be 8 inches (205 mm) maximum....
