, consumers with vision impairments, and related stakeholders in a workshop to consider issues in exhibit design and operation for people with low vision and blindness....
Search Results "Franchise Design"
Filters
Commonly Searched Documents
-
Introduction
-
Section 37.165 Lift and Securement Use
Entities may require wheelchair users to ride in designated securement locations....
-
1009.3 Sloped Entries
Providing an aquatic wheelchair made of non-corrosive materials and designed for access into the water will protect the water from contamination and avoid damage to personal wheelchairs...
-
Chapter 6: Plumbing Elements and Facilities
Alternate specifications are provided for plumbing elements designed for children’s use as exceptions to requirements based on adult dimensions....
-
Part 1: Evaluating the Physical Accessibility of Polling Places
The 2016 Checklist, found in Part 3 of this document, is designed to assist officials in determining whether a facility being considered for use as a polling place is accessible to people...
-
11B-1009.3 Sloped entries
Providing an aquatic wheelchair made of non-corrosive materials and designed for access into the water will protect the water from contamination and avoid damage to personal wheelchairs...
-
1008.4.3 Play Tables
EXCEPTION: Play tables designed and constructed primarily for children 5 years and younger shall not be required to provide knee clearance where the clear floor or ground space required...
-
ADA Requirements - Effective Communication
These requirements, or rules, clarify and refine issues that have arisen over the past 20 years and contain new, and updated, requirements, including the 2010 Standards for Accessible Design...
-
1607.8.2 Grab bars, shower seats and dressing room bench seats
Grab bars, shower seats and dressing room bench seat systems shall be designed to resist a single concentrated load of 250 pounds (1.11 kN) applied in any direction at any point on the grab...
-
Section 4.1.2, Accessible Sites and Exterior Facilities: New Construction (Preamble, Section-by-Section Analysis)
The final rule retains the UFAS scoping for parking but also requires that at least one of every eight accessible parking spaces be designed with adequate adjacent space to deploy a lift...
-
Knee and Toe Clearance
(Exception 2), lavatories and kitchen sinks in residential dwelling units provided certain conditions to facilitate retrofit for a forward approach are met (Exception 3), and fixtures designed...
-
1008.4.3 Play Tables
EXCEPTION: Play tables designed and constructed primarily for children 5 years and younger shall not be required to provide knee clearance where the clear floor or ground space required...
-
Frequently Asked Questions about Play Areas
The ABA Standards, which are very similar to the ADA Standards, apply to facilities designed, built, altered, or leased with federal funds....
-
5. CONSTRUCTION TOLERANCES
CONSTRUCTION TOLERANCES: While it is always advisable to avoid design requirements that are at or near dimensional thresholds, construction tolerances may be used when evaluating the compliance...
-
Gangways
Designers and operators should note that there are no exceptions to the accessible route requirements where the accessible route connects fixed piers to land or other fixed structures....
-
M305.2.3 Fittings
Rationale: It is understood that transfer supports will be of varying configuration and designs. Some may be removable, some foldable or articulating....
-
WMD POSITIONS FOR TRANSFER
WMD POSITIONS FOR TRANSFER The design of the corner radii allows closest possible position for wheelchair transfers, minimizing potential gaps and improving the patient’s ability to transfer...
-
Has there been consideration for electric vehicles being parked in valet mode that could share EVSE and meet the equivalent EVSE option? This could reduce the cost of construction and major electrical upgrades.
DSA encourages designers to consult with jurisdictional building officials (primarily city- and county building departments) whenever there is a question of code interpretation or application...
-
Must all new or reconstructed facilities be accessible?
These include observation galleries, mechanical equipment rooms, and spaces or facilities designed for use by employees needing considerable dexterity and special abilities....
-
§ 36.308(c)(1) Seating areas
When designating seating sections of assembly areas providing spectators with, or entitling them to, distinct services or amenities that are not generally available to other spectators,...
-
C101.1 Purpose
These Revised 255 Guidelines, which consist of 255 Chapters 1 and 2 (Appendix B), along with Chapters 3 through 7 (Appendix C), contain scoping and technical requirements for the design,...
-
Section 36.405 Alterations: Historic Preservation (Section-by-Section Analysis)
guidance on making alterations to buildings or facilities that are eligible for listing in the National Register of Historic Places under the National Historic Preservation Act or that are designated...
-
C. Executive Order 13132: Federalism
The proposed 255 Guidelines apply to manufacturers of telecommunications equipment and customer premises equipment and require that equipment is designed, developed, and fabricated to be...
-
How ALSs Operate
Recommendation: While a "complete" system with the necessary components can be bought off-the-shelf, ALSs designed as "mix and match" systems can provide a range of components appropriate...