Separate requirements are provided based on the number of public pay telephones provided at a bank of telephones, within a floor, a building, or on a site....
Search Results "Clearance Around Base"
Filters
Commonly Searched Documents
-
11B-217.4 TTYs
-
11B-411.2.1.2.1 Keypads
The dot shall have a base diameter of 0.118 inch (3 mm) minimum and 0.120 inch (3.05 mm) maximum and a height of 0.025 inch (0.6 mm) minimum and 0.037 inch (0.9 mm) maximum....
-
11B-217.4 TTYs
Separate requirements are provided based on the number of public pay telephones provided at a bank of telephones, within a floor, a building, or on a site....
-
11B-813 Adult changing facilities
ETA Editor's Note Adult changing facilities are not addressed by 2010 ADA Standards, although a case could be made, based on the general obligation for governments to make their services...
-
Mockett CH12-SSS Dual Prong Coat Hook
DESCRIPTION Dual pronged Satin Stainless Steel coat hook sits on twin bases for a distinguished executive design and a clean simple line....
-
Section 36.208 Direct Threat (Preamble, Section-by-Section Analysis)
must be based on an individual assessment that conforms to the requirements of paragraph (c) of this section....
-
a) "Neighborhood" Access Theory
He admitted, however, that his opinion was not based on any authoritative publication in his field, but was simply his personal opinion. RT 407:8-22....
-
Background
This approach is also based on section 204 of the ADA, which provides that the regulations issued by the Attorney General to implement title II shall be consistent with the ADA and with...
-
James E. Woods, Ph.D., P.E. Natural Lighting for Persons with Low Vision
Glare Criteria (slide 4) All of the measures, with which I’m familiar in environmental control, are based on psychophysiology....
-
Wikk Industries Inc. Bollard With Push Plate Part #BPR8 SM AINS32D (630)
Surface mount with concealed mounting base. Flat Recessed area for ADA switch and Card Reader. Welded angle top to the back....
-
Magnuson Group VOICI Magazine Racks
Choose from standard glides or caster base meodels. Shelves are adjustable to three positions, horizontal, 30 degrees or 45 degrees....
-
Magnuson Group FLIP Brochure & Leaflet Holders
Silver base and post with glass green acrylic....
-
Pilot Rock AFT Series - End Accessible Traditional A-Frame Picnic Table - Using Recycled Plastic
8 ft. long table is wheelchair accessible at both ends which meet or exceed current ADA guidelines for wheelchair accessibility (30" wide, 27" under table top and 19" knee plus 5" toe clearances...
-
Pilot Rock AFT Series - End Accessible Traditional A-Frame Picnic Table - Using Lumber
8 ft. long table is wheelchair accessible at both ends which meet or exceed current ADA guidelines for wheelchair accessibility (30" wide, 27" under table top and 19" knee plus 5" toe clearances...
-
Kohler® Mazz Single-Handle Pull-Down Sprayer Kitchen Faucet in Vibrant Stainless
Single lever handle is simple to use and makes adjusting water temperature easy High-arc gooseneck spout and 360-degree spout rotation offer superior clearance for filling pots and cleaning...
-
11B-233.1 General
The tenants in an apartment complex receive Section 8 tenant-based vouchers in payment for rent. Does that trigger compliance with Chapter 11B?...
-
Feature 4 - Routes to the Meeting Space
Therefore, objects that do not provide sufficient head clearance or that are mounted too high and protrude into a route can become hazards because they cannot be detected by people who use...
-
226.1 General
Consider work surfaces that are flexible and permit installation at variable heights and clearances....
-
Temporary Solutions for Election Day - Hallways and Corridors - Voters Who are Blind or Who Have Low Vision
Problem Two: Ceiling or wall-mounted television monitor has less than 80 inches of clearance between the floor and the bottom of the unit....
-
R404 Clear Spaces (Section-by-Section Analysis)
Clear spaces are permitted to include knee and toe clearance and to be positioned for either forward or parallel approach to an element, unless another requirement specifies otherwise....
-
Door and Gate Hardware [§404.2.7]
Recommendations: Specify hardware that is usable with a closed fist of loose grip Bars, pulls, and similar hardware should provide sufficient knuckle clearance (1½” minimum...
-
DOT Response
The Department continues to believe that standards based on Access Board guidelines for transportation vehicles are the appropriate basis for requirements pertaining to the design and construction...
-
FOREWORD
The guidelines provided in the American Association of State Highway and Transportation Officials (AASHTO) Guide to the Development of Bicycle Facilities are based on the physical dimensions...
-
Wikk Industries Inc. PART#BPS SM-INGR CLEAR (628) with I36-3 CLEAR (628)
6”X6”X42” Tall, Clear Anodized Aluminum (628), Surface mount with concealed mounting base, 1 prep for INGRESS’R® ADA switch, Removable Black ABS cap Shown on the bollard- I36-3 Clear...
