[2010 ADA Standards] 406.2 Counter Slope. Counter slopes of adjoining gutters and road surfaces immediately adjacent to the curb ramp shall not be steeper than 1:20....
Search Results "Electroacoustic Performance Standards"
Filters
Commonly Searched Documents
-
11B-406.5.8 Counter slope
-
11B-1009.2.6 Footrests and armrests
[2010 ADA Standards] 1009.2.6 Footrests and Armrests. Footrests shall be provided and shall move with the seat....
-
11B-806.2.3.1 Personal lift device floor space
ETA Editor's Note The clearance prescribed for a personal lift device at CBC 11B-806.2.3.1 is not required by 2010 ADA Standards....
-
11B-605.4 Flush controls
[2010 ADA Standards] 605.4 Flush Controls. Flush controls shall be hand operated or automatic. Hand operated flush controls shall comply with 309....
-
11B-206.4.8 Service entrances
[2010 ADA Standards] 206.4.8 Service Entrances. If a service entrance is the only entrance to a building or to a tenancy in a facility, that entrance shall comply with 404....
-
ACCESSIBLE SPACE
Space that complies with these standards....
-
Companion Seats
Section 4.33.3 of the 1991 Standards required at least one fixed companion seat to be provided next to each wheelchair space....
-
216 and 703 Signs
216 and 703 Signs The following types of signs, though they are not specifically subject to the 1991 Standards requirement for signs, will now be explicitly exempted by sections 216 and...
-
Power-Operated Doors or Gates
Comments noted that since the ASME/ANSI A18.1 standard requires such doors and gates to be self-closing, the specification in the rule was redundant. Response....
-
H29
[ADA Standards § 4.25.3] Yes No Note: For many emergency shelters, evacuees are not expected to use shower or bathing facilities due to the short period they may stay at the...
-
Question 16
Should the Department develop a general standard that specifies requirements for beds wherever accessible sleeping accommodations are required?...
-
A4.30.4 RAISED OR INDENTED CHARACTERS OR SYMBOLS
Braille characters can be used in addition to standard alphabet characters and numbers....
-
2. Establishment of Advisory Committee
The Access Board has used advisory committees consisting of representatives of interest groups that are affected by its guidelines and standards to assist in developing the guidelines and...
-
Accessible Means of Entry to Pools
Section 242 of the 2010 Standards requires at least two accessible means of entry for larger pools (300 or more linear feet) and at least one accessible entry for smaller pools....
-
212 and 606 Kitchens, Kitchenettes, Lavatories, and Sinks
212 and 606 Kitchens, Kitchenettes, Lavatories, and Sinks The 1991 Standards, at sections 4.24, and 9.2.2(7), contain technical requirements for sinks and only have specific scoping requirements...
-
Grab bars
Grab bars: Section 609 of the ADA-ABA standards [7] includes provisions for grab bars in areas where transfers are expected....
-
Section 36.304 Removal of Barriers (Section-by-Section Analysis)
Because the Department uses the 1991 Standards as a guide to identify what constitutes a barrier, the proposed standards will provide a new reference point in assessing an entity's obligations...
-
A. Arena Assembly Seating:
See the 2010 Standards §§ 221.3, 802.3.1 and 802.3.2....
-
§ 36.406(e) Housing at a place of education.
Housing at a place of education that is subject to this section shall comply with the provisions of the 2010 Standards applicable to transient lodging, including, but not limited to, the...
-
410 Platform Lifts
This section has been updated to reference the new ASME A18.1 Safety Standard for Platform Lifts and Stairway Chairlifts (410.1)....
-
M201.1 Enforcing Authority (Section-by-Section Analysis)
The MDE NPRM proposed to explain that the enforcing authority would specify the minimum number of types of accessible diagnostic equipment that would be required to comply with the MDE Standards...
-
Main Lobby
See Standards § 7.2(1). j....
-
Section 35.151(i) Curb Ramps (Section-by-Section Analysis)
Both the 1991 Standards and the proposed standards provide technical guidance for the installation of curb ramps....
-
C101.3 Conventional Industry Tolerances (Section-by-Section Analysis)
C101.3 Conventional Industry Tolerances (Section-by-Section Analysis) This proposed section, which has a parallel provision in the proposed 508 Standards (E101.3), would provide that...