ADA standards apply to buses and bus boarding and alighting areas as well as BRT vehicles and stops/stations. (DOT ADA Regulation 49 C.F.R....
Search Results "Electroacoustic Performance Standards"
-
Bus boarding and alighting areas, BRT vehicles and stops/stations
-
§ 36.406(c) Places of lodging.
Places of lodging subject to this part shall comply with the provisions of the 2010 Standards applicable to transient lodging, including, but not limited to, the requirements for transient...
-
§35.103(a)
Except as otherwise provided in this part, this part shall not be construed to apply a lesser standard than the standards applied under title V of the Rehabilitation Act of 1973 or the regulations...
-
§ 35.103(a) Rule of interpretation
Except as otherwise provided in this part, this part shall not be construed to apply a lesser standard than the standards applied under title V of the Rehabilitation Act of 1973 or the regulations...
-
Definition of Segway and Scope of Interim Policy
unable to move about without the aid of crutches, a wheelchair or any other form of support, or that limits the person's functional ability to ambulate, climb, descend, sit, or rise, or to perform...
-
6. How Can I Help My Client Get a Reasonable Accommodation?
For example, you may be told about a particular job function and asked whether the requested accommodation would help your client to perform it, or you may be asked whether a different accommodation...
-
C. Training
The County will require that all Highway Department personnel who implement the temporary remedies, sign a form in which they are asked to swear or affirm that in performing Election Day...
-
221.2.3.1 Horizontal Dispersion
Horizontal dispersion of wheelchair spaces is the placement of spaces in an assembly facility seating area from side-to-side or, in the case of an arena or stadium, around the field of play or performance...
-
221.2.3.1 Horizontal Dispersion
Horizontal dispersion of wheelchair spaces is the placement of spaces in an assembly facility seating area from side-to-side or, in the case of an arena or stadium, around the field of play or performance...
-
Notes
The Impact of Transfer Setup on the Performance of Independent Transfers: Final Report. Presentation to US Access Board. Washington, DC. 2011 2....
-
102 Dimensions for Adults and Children
102 Dimensions for Adults and Children Section 2.1 of the 1991 Standards stated that the specifications were based upon adult dimensions and anthropometrics....
-
406.1 General
Where data connections used for input and output are provided, at least one of each type of connection shall conform to industry standard non-proprietary formats....
-
2.1.1
In most cases, it is best to refer to industry standard tolerances or other industry documents when they exist....
-
16(a)(vii)
(vii) Any non-valet parking facilities owned or operated by the hotel have the number of accessible car and van-accessible parking spaces required by the ADA Standards and comply with the...
-
§ 35.151(c)(1)
construction or alterations commence after July 26, 1992, but prior to September 15, 2010, then new construction and alterations subject to this section must comply with either UFAS or the 1991 Standards...
-
Section 36.406(e) Housing at a Place of Education
standards....
-
Section 35.151(f) Housing at a place of education
standards....
- Kawneer North America 350/500 Heavy Wall™ Entrances
- Rebuilding Together Oakland East Bay - Oakland, CA
- Allegion Falcon MA Series Mechanical Locks
-
11B-404.2.5 Thresholds
[2010 ADA Standards] EXCEPTION: Existing or altered thresholds ¾ inch (19 mm) high maximum that have a beveled edge on each side with a slope not steeper than 1:2 shall not be required...
-
Height: ADA Standard Section 1005.2.1
1003.2.12.2 of the International Building Code (2000 edition) or sections 1012.2 and 1012.3 of the International Building Code (2003 edition) (incorporated by reference, see “Referenced Standards...
-
11B-903.3 Size
[2010 ADA Standards] 903.3 Size. Benches shall have seats that are 42 inches (1065 mm) long minimum and 20 inches (510 mm) deep minimum and 24 inches (610 mm) deep maximum....
-
11B-404.2.5 Thresholds
[2010 ADA Standards] EXCEPTION: Existing or altered thresholds ¾ inch (19 mm) high maximum that have a beveled edge on each side with a slope not steeper than 1:2 shall not be required...