Copies of the referenced standard may be obtained from the Advanced Television Systems Committee, 1776 K Street NW, Suite 200, Washington, DC 20006-2304 (http://www.atsc.org/)....
Search Results "Electroacoustic Performance Standards"
-
E102.4 Advanced Television Systems Committee (ATSC)
-
1. Scope
covers the mathematical processing of longitudinal profile measurements to produce a pedestrian pathway roughness statistic called the Pathway Roughness Index (PRI). 1.2 This provides a standard...
-
16(a)(iii)
(iii) The hotel has the required number of rooms for guests with hearing impairments, as set forth in ADA Standards §§ 9.1.2 and 9.1.3, that comply with ADA Standards § 9.3....
-
Toilet and Bathing Rooms
Section 213 of the 2010 Standards sets out the scoping requirements for toilet and bathing rooms....
-
Issue: Historically Significant Facilities
If alterations are being made to a historically significant property, however, these changes must be made in conformance with the ADA Standards for Accessible Design, (“the Standards”) 28...
-
Introduction
The ADA requires that new construction and alterations to existing facilities comply with the ADA Standards for Accessible Design 1 (Standards)....
-
104 Conventions
Section 104.1 of the 2010 Standards notes that dimensions not stated as a “maximum” or “minimum” are absolute....
-
Introduction
True “construction industry tolerances” as defined by the ADA Standards, should not be confused with another concept that we call “Acceptable Measurements.” ...
-
Appendix 4 – References
Sydney, Australia: Standards Australia International. Australian Standard. (1992)....
-
§ 1194.25(e)
(e) When products provide auditory output, the audio signal shall be provided at a standard signal level through an industry standard connector that will allow for private listening. ...
-
G.3.ii. - Are some types of secure electronic equipment, such as secure telecommunications devices that are specifically designed to prevent eavesdropping and other forms electronic attack, subject to Section 508 requirements?
Unless an exception applies, these technologies are considered EIT and must meet the Access Board standards....
-
1. PURPOSE
This document sets standards for facility accessibility by physically handicapped persons for Federal and federally-funded facilities....
-
11B-407.2.2.4 Reserved
ETA Editor's Note Lacking certain Exceptions allowed by 2010 ADA Standards, and imposing additional requirements regarding visible signals, the preceding CBC requirements pertaining...
-
Lines of Sight for Wheelchair Spaces
This exception derives from the ANSI A117.1‒2003 standard and recognizes that viewing angles at the mid-sections of rows are generally better than those at the ends of rows....
-
H.7 - Are hand held devices (palm tops, cell phones) covered by Section 508?
This technology is "electronic and information technology" covered by Section 508 and the Access Board's standards....
-
G. Women's Spa and Fitness Center Locker Room
Women's Spa and Fitness Center Locker Room (1) Defendants will convert the Swiss shower of the current Royal Suite spa massage treatment room to a roll-in shower, pursuant to 2010 Standards...
-
Section 36.211 Maintenance of Accessible Features (Section-by-Section Analysis)
reduce the number of required elements below the requirements of the 1991 Standards....
-
Section 35.133 Maintenance of accessible features. (Section-by-Section Analysis)
reduce the number of required elements below the requirements of the 1991 Standards....
-
BHMA
for Power Assist and Low Energy Power Operated Doors 1010.1.4.2, 11B-404.2.9, 11B-404.3, 11B-408.3.2.1, 11B-409.3.1 [2010 ADA Standards] 105.2.1 ANSI/BHMA....
-
Introduction
, employment tests or other selection criteria that screen out or tend to screen out an individual with a disability or a class of individuals with disabilities unless the standard, test...
-
11B-505.5 Clearance
[2010 ADA Standards] 505.5 Clearance. Clearance between handrail gripping surfaces and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
11B-505.5 Clearance
[2010 ADA Standards] 505.5 Clearance. Clearance between handrail gripping surfaces and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
Executive Summary
The question is how does this population negotiate the built environment and what kinds of codes, standards, and guidelines exist for designers of new construction and renovations....
-
I. Introduction to the Study
The 2010 Americans with Disabilities Act (ADA) Standards for Accessible Design and the Architectural Barriers Act (ABA) Accessibility Standards require newly constructed playgrounds and...