All dimensions are subject to conventional industry tolerances except where the requirement is stated as a range with specific minimum and maximum end points....
Search Results "Control End Wall"
-
11B-104.1.1 Construction and manufacturing tolerances
-
11B-104.1.1 Construction and manufacturing tolerances
All dimensions are subject to conventional industry tolerances except where the requirement is stated as a range with specific minimum and maximum end points....
-
704.4 Materials
Exterior walls shall be of materials permitted by the building type of construction....
-
11B-1004.1 Clear floor space
To optimize space use, designers should carefully consider layout options such as connecting ends of the row and center aisle spaces....
-
11B-1004.1 Clear floor space
To optimize space use, designers should carefully consider layout options such as connecting ends of the row and center aisle spaces....
-
Stabila, Inc. Tech Digital Electronic Level Type 196-2
Electronic measuring technology / Two digital displays / Audible inclination guide / IP 65 Dust and Waterproof / Removable shock-absorbing end caps with anti-slip wall grips....
-
Toilet Buildings and Pit Toilets
recreation sites with only one riser must comply with the requirements for toilet room size and clearances in section 603 of ABAAS and with the requirements for toilet seats, grab bars, controls...
-
11B-411.2.1.1 Location
Hall call consoles shall be wall-mounted. On floors with a building entry, including parking and transfer levels, each hoistway entrance shall be adjacent to a hall call console....
-
11B-411.2.1.1 Location
Hall call consoles shall be wall-mounted. On floors with a building entry, including parking and transfer levels, each hoistway entrance shall be adjacent to a hall call console....
-
11B-411.2.1.1 Location
Hall call consoles shall be wall-mounted. On floors with a building entry, including parking and transfer levels, each hoistway entrance shall be adjacent to a hall call console....
-
11B-809.10.7.2 Location
The centerline of the water closet shall be 17 inches (432 mm) minimum to 18 inches (457 mm) maximum from a wall or partition that is 54 inches (1372 mm) minimum in length....
-
604.8.1.2 Doors
Doors shall be located in the front partition or in the side wall or partition farthest from the water closet....
-
604.8.1.2 Doors
Doors shall be located in the front partition or in the side wall or partition farthest from the water closet....
-
Signage
Where permanent identification is provided for rooms and spaces, signs shall be installed on the wall adjacent to the latch side of the door....
-
Technical Memorandum TM 2013-23 Storage (Not in Kitchens or Kitchenettes)
For purposes of compliance with TAS 225.2, the Department shall consider base and wall cabinets to be the same type of storage if designed the same (i.e. both have doors), used for the same...
-
1017.4 Passing Spaces
Where the full length of a trail does not fully comply with 1017, a passing space shall be located at the end of the trail segment that fully complies with 1017....
-
1017.4 Passing Spaces
Where the full length of a trail does not fully comply with 1017, a passing space shall be located at the end of the trail segment that fully complies with 1017....
-
1.1.6 Flatness of walk cross slope
Measure along two paths, each with the end of the digital inclinometer 1 ft (300 mm) from the edge of the path and placed toward the middle of the path. See Fig. 2....
-
11B-609.4 Position of grab bars
The height of the lower grab bar on the back wall of a bathtub shall comply with Section 11B-607.4.1.1 or 11B-607.4.2.1....
-
11B-609.4 Position of grab bars
The height of the lower grab bar on the back wall of a bathtub shall comply with Section 11B-607.4.1.1 or 11B-607.4.2.1....
-
Bobrick Folding Shower Seat B-517
Seat 32 7/8" (835mm) wide, projects 22 11/16" (575mm) from wall. Right-hand seat....
-
Bobrick Folding Shower Seat B-518
Seat 32 7/8" (835mm) wide, projects 22 11/16" (575mm) from wall. Left-hand seat....
-
The Presentation Area / Speaker’s Platform Design and Considerations
Neither should a presenter using a mobility device be seated at the end of a skirted table instead of with the other presenters....
-
Existing Elevators: ADA Standard Section 206.6.1
Section 206.6.1 covers scoping requirements in the most current ADA Standards for accessible routes existing elevators.
