Floor or Ground Space Figure 305.5 Position of Clear Floor or Ground Space Figure 305.7.1 Maneuvering Clearance in an Alcove, Forward Approach Figure 305.7.2 Maneuvering...
Search Results "Clear Tread Width"
-
FIGURE INDEX
-
LaCantina Multi-slide Contemporary Clad Sliding Door System
Panel height may determine max panel width such that the glass does not exceed 60sqft. Color Options LaCantina Doors offer a wide range of in-stock, optional and custom colors....
-
Accessibility - Flatness and Lippage
Project specifications should make clear which trade is responsible for the required alterations if the subfloor is found not to be in compliance with the flatness requirements....
-
Lutron Sivoia QED Kirbé Vertical Motorized Drapery System
Depending on the width of the drapery, brackets can be selected that accept either a roller 64™ or a roller 100 shade drive. Size Tube diameter: 2.56 in....
-
1017.9 Protruding Objects
However, entities should maintain the vertical clearance along the trail tread, resting intervals, and passing spaces free from tree branches for 80 inches high minimum above the ground....
-
Required Compliance [§210]
The Standards do not apply to stairways that are not part of a required means of egress nor to alternating tread devices and “ship’s ladders.”...
-
11B-502.6.3 Location
Signs shall be permanently posted either immediately adjacent to the parking space or within the projected parking space width at the head end of the parking space....
-
11B-502.6.3 Location
Signs shall be permanently posted either immediately adjacent to the parking space or within the projected parking space width at the head end of the parking space....
-
Showers
Several commenters requested that the final Guidelines provide dimensions on the appropriate width and height of showers and shower doors....
-
In-swinging Bathroom Doors
Once a minimum door width is provided, a tenant who finds a bathroom not readily usable can have the door rehung as an outswinging door....
-
Stanley SB600 Bifolding Door
Panels fold when retracting which allows for about 70% of the door’s package to be free and clear for passage....
-
Step 2: Identify the Presence of Limiting Factors
Is the trail tread width 12 inches (227 millimeters) or less for a distance of at least 20 feet (6 meters)?...
-
Lift-U® Fold-Out Rising Floor Ramp
Gaps in floor when deployed – minimal Hinge Knuckles between Ramp & Bus structure – eliminated SPECIFICATIONS Clear width at ramp surface – 30 Inches Minimum...
-
LaCantina Aluminum Thermally Controlled Slider System
Kitchen servery pass through Sizing and Configuration The Aluminum Thermally Controlled system is available in any configuration with panels up to 8' wide and 12' tall, panel width...
-
References
The exception permits slopes not steeper than 1:48. 305.2 (Clear Floor or Ground Space) Floor or Ground Surfaces....
-
1003.2.12.2 Opening limitations
Exception: The triangular opening formed by the riser, tread and bottom rail at the open side of a stairway shall be of a maximum size such that a sphere of 6 inches (152mm) in diameter...
-
802.1.5 Overlap
The term "circulation paths" used in 802.1.5 means aisle width required by applicable building or life safety codes for the specific assembly occupancy....
-
AccessRec DuraDeck 2 Molded Plastic Mat Ground Surface
Each DuraDeck panel has a unique integrated tread pattern molded onto sides, providing traction and stability for nearly any type of equipment, cranes, vehicles, and pedestrians....
-
2013 & 2016 CBC Answer
Based on the attached diagram, the accessible parking and its access aisle are adjacent to another parking space; therefore the width measurement shall be taken from centerline of the markings...
-
11B-802.1.5 Overlap
The term "circulation paths" used in 802.1.5 means aisle width required by applicable building or life safety codes for the specific assembly occupancy....
-
802.1.5 Overlap
The term "circulation paths" used in 802.1.5 means aisle width required by applicable building or life safety codes for the specific assembly occupancy....
-
802.1.5 Overlap
The term "circulation paths" used in Section 802.1.5 means aisle width required by applicable building or life safety codes for the specific assembly occupancy....
-
11B-802.1.5 Overlap
The term "circulation paths" used in 802.1.5 means aisle width required by applicable building or life safety codes for the specific assembly occupancy....
-
11B-802.1.5 Overlap
The term "circulation paths" used in Section 11B-802.1.5 means aisle width required by applicable building or life safety codes for the specific assembly occupancy....
