to the right of the station allows them to use their right side as the trailing arm which carries more of the force during a transfer than does the leading arm when moving toward a new surface...
Search Results "Fire-Building Surface"
Filters
Commonly Searched Documents
-
Clear Space Evaluation
-
Transfer Sides (M301.2.3 and M302.2.3)
the surface, and that each transfer side provide unobstructed access to the transfer surface....
-
5.4.4 Transfer Support Distance From Transfer Surface for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
5.4.4 Transfer Support Distance From Transfer Surface for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position....
-
CASI California Survey Reports Acceptance Criteria - Field Tolerances AC 03-12
________________________________ Proposed 05-10-12 Discipline: Access Compliance References: CBSC Part 2, 11B-104; ADAS The meaning and use of regulations in the California Building...
-
WHAT HAS CHANGED THE MOST?
At least two areas in the revised regulations merit attention from cultural arts administrators: Policies, Procedures, and Practices Service...
-
Common Use Areas in Residential Facilities—Section 203.8 of the 2010 Standards
The only exception would be common use areas provided on upper stories of a non-elevator building provided the same common use areas are provided on the ground floor....
-
Single riser stair handrail extension
A stair is defined as one or more risers. For a stair with one riser only, what is the length of the bottom handrail exension required?
-
State of California Disability Access Services (DAS) - Boost Your Business: Physical Access, Technical Assistance & CASp
Boost Your Business Video Chapters: YouTube Channel Introduction Parking Path of Travel Ramps Curb Ramps Doors Halls and...
-
National Register of Historic Places
our files and adding them to our online database Fast Facts The more than 80,000 properties listed in the National Register represent 1.4 million individual resources - buildings...
-
810.2.4 Slope
Parallel to the roadway, the slope of the bus stop boarding and alighting area shall be the same as the roadway, to the maximum extent practicable. Perpendicular to the roadway, the...
-
810.2.4 Slope
Parallel to the roadway, the slope of the bus stop boarding and alighting area shall be the same as the roadway, to the maximum extent practicable. Perpendicular to the roadway, the...
-
11B-810.2.4 Slope
Parallel to the roadway, the slope of the bus stop boarding and alighting area shall be the same as the roadway, to the maximum extent practicable. Perpendicular to the roadway, the...
-
810.2.4 Slope
810.2.4 Slope. Parallel to the roadway, the slope of the bus stop boarding and alighting area shall be the same as the roadway, to the maximum extent practicable. Perpendicular to...
-
1.1.10 Ramps
1.1.10 Ramps. Measure accessible ramps for overall running slope and cross slope as well as local running slope and cross slope variations (flatness) in accordance with Sections...
-
1.1.14 Flatness of ramp cross slope
1.1.14 Flatness of ramp cross slope. For ramps, measure flatness of cross slope by placing a 24 - in. (600 mm) digital inclinometer perpendicular to the line of travel at 4 ft (1200...
-
11B-810.2.4 Slope
Parallel to the roadway, the slope of the bus stop boarding and alighting area shall be the same as the roadway, to the maximum extent practicable. Perpendicular to the roadway, the...
-
11B-810.2.4 Slope
Parallel to the roadway, the slope of the bus stop boarding and alighting area shall be the same as the roadway, to the maximum extent practicable. Perpendicular to the roadway, the...
-
1002.2 Accessible Routes
In load or unload areas and on amusement rides, handrails provided along walking surfaces complying with 403 and required on ramps complying with 405 shall not be required to comply with...
-
1002.2 Accessible Routes
In load or unload areas and on amusement rides, handrails provided along walking surfaces complying with 403 and required on ramps complying with 405 shall not be required to comply with...
-
1002.2 Accessible Routes
In load or unload areas and on amusement rides, handrails provided along walking surfaces complying with 403 and required on ramps complying with 405 shall not be required to comply with...
-
A4.32.4 Height of Tables or Counters
thickness of 1 1/2 in (38 mm) and a clearance of 1 1/2 in (38 mm) between legs and the underside of a work surface. 2This type of wheelchair arm does not interfere with the positioning...
-
11B-224.7 Housing at a place of education
. ◼ ETA Editor's Note From DSA's "Summary of 2022 California Building Code Changes for Accessibility in the Triennial Code Cycle": "Code amendment replaces “multi-bedroom housing units...
-
11B-1002.2 Accessible routes
In load or unload areas and on amusement rides, handrails provided along walking surfaces complying with Section 11B-403 and required on ramps complying with Section 11B-405 shall not be...
-
11B-1002.2 Accessible routes
In load or unload areas and on amusement rides, handrails provided along walking surfaces complying with Section 11B-403 and required on ramps complying with Section 11B-405 shall not be...
