5.3.3 Transfer Sides for Equipment Used by Patients in Seated Position.
Search Results "Fire-Building Surface"
Filters
Commonly Searched Documents
-
5.3.3 Transfer Sides for Equipment Used by Patients in Seated Position
-
5.3.3.1 Transfer Sides for Exam Chairs with Fixed Footrests
5.3.3.1 Transfer Sides for Exam Chairs with Fixed Footrests. The 17 inch minimum depth and 21 inch minimum width should be located on both sides of examination chairs with a fixed...
-
Addendum E: Comparison of participants tested at the National Disabled Veterans Winter Sports Clinic (NDVWSC) compared to the participants tested at the Human Engineering Research Laboratories and Hiram G. Andrews Center
At the time this addendum was composed, there were 31 participants enrolled in the phase 2 study at HERL (27 men and 4 women). This group of subjects was compared to all the...
-
Kitchen Cabinets
42” a.f.f. (above finished floor) wall-mounted cabinets and counters for tall people. With a remodel, they can be lowered to 32” a.f.f. for wheelchair users 10”...
-
9.2* POST OFFICE LOBBIES
Where writing desks or tables are provided, a minimum of at least one writing desk or table that complies with 4.32 must be provided. Clear passageways in front of customer service...
-
Circular Cross Section and Clearance (§505.5, §505.7)
Circular Cross Section and Clearance (§505.5, §505.7)
-
709.3 Fire-resistance rating
A 1-hour fire-resistance rating is required for smoke barriers. Exception: Smoke barriers constructed of minimum 0.10-inch thick (2.5 mm) steel in Group I-3 buildings....
-
Ability Self-Assessment
Abilities/Preparedness Yes No Do you know the location of all fire alarms and extinguishers?...
-
5.3.2.1 Transfer Sides for Stretchers
The transfer surface shall be located to provide the ability to transfer from a mobility device onto both long sides of the surface....
-
General Accommodations
General Accommodations: Employers should have emergency alarms and signs showing the emergency exit routes. These alarms and signs should be accessible and maintained in...
-
11B-226.4 Baby changing tables
If they must be modified, for example, to comply with the maximum work surface height of 34 inches, their noncompliant location (i.e., inside an accessible water closet compartment, or obstructing...
-
Electric Vehicle Charging Stations, Accessibility: FAQs
[See subsections ...]
-
M301.2.2 Sunset Provision (Section-by-Section Analysis)
(Significant Changes – Transfer Surface Adjustability), this is a new provision that was added to the final rule in conjunction with the new requirement of a low height range in M301.2.1...
-
M305.2.1.1 End Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.1 and M302.2 shall be located on the short side (length) opposite the transfer side....
-
Emergency Evacuation Planning Guide For People with Disabilities
Low Vision • Deaf or Hard of hearing • Speech Disabilities • Cognitive Disabilities ________________________________________________________________________ © June 2016 National Fire...
-
Where to Measure Along the Route
-
Parking Spaces: ADA Standard Section 502
Section 502 covers the current ADA Standards for accessible parking spaces.
-
Issue: Historically Significant Facilities
Common Problem: City governments may believe that they have no duty to make changes to historically significant buildings and facilities to improve accessibility for people with disabilities...
-
M301.2.3 Transfer Sides
(width) of the surface...
-
Current Accessibility Guidelines That Apply to the Forest Service
The complete ABAAS is available at http://www.access-board.gov/guidelines-and-standards/buildings-and-sites/about-the-aba-standards/aba-standards....
-
Is My Ramp ADA Compliant?
-
Changes in Level within a Dwelling Unit
Act's accessibility requirements only on the floor that is served by the building elevator....
-
11B-809.9.3 Removable base cabinets
Knee and toe space complying with Section 11B-306 shall be provided at sinks and work surfaces required to comply with Section 11B-809.9.4....
