Altered elements or spaces must comply with relevant provisions of the standards except where compliance is technically infeasible....
Search Results "Plumbing Element"
-
What requirements of the standards apply in an alteration?
-
Handrails [§405.8, §505]
The gripping surface and adjacent surfaces must be free of abrasive or sharp elements....
-
1003.1 Applicability
The general requirements specified in Sections 1003 through 1015 shall apply to all three elements of the means of egress system, in addition to those specific requirements for the exit...
-
1003.1 Applicability
The general requirements specified in Sections 1003 through 1015 shall apply to all three elements of the means of egress system, in addition to those specific requirements for the exit...
-
PATH OF TRAVEL
Path of travel elements may be subject to upgrade as part of the alteration to an existing building if they do not conform to current accessibility requirements. ◼ [ADA Titles II &...
-
Alterations to Residential Facilities
Applying the general requirements for alterations to housing can result in partially accessible dwelling units where single elements or spaces in dwelling units are altered....
-
Aisle Stairs and Ramps in Assembly Areas
The 2010 Standards, at section 405.1, exempt aisle ramps adjacent to seating in assembly areas and not serving elements required to be on an accessible route, from complying with all of...
-
4.4.1 Overview of Mammography Accessibility Considerations
Ordinarily, the accessibility dimensions are static and are measured from a static element, such as the floor....
-
Effect on the certification process of using more than one regulatory scheme at the state or local level to establish accessibility requirements for title III facilities with new design requirements in the proposed standards. (Section-by-Section Analysis)
The proposed standards will include requirements for elements and spaces that are not addressed specifically in the 1991 Standards, including elements within recreational facilities and...
-
How this guide is organized
Reference samples and guidance provides advice on what to do and what not to do for different interface elements Section 2....
-
Future Work
Grab bars and handhelds placed in other locations (e.g. in the front, on the sides, overhead, or to the element itself) could have enabled more successful transfers. ...
-
Maintenance of Accessible Features
(c) If the 2010 Standards reduce the technical requirements or the number of required accessible elements below the number required by the 1991 Standards, the technical requirements or the...
-
Web Accessibility
Ensure that interactive elements are easy to identify. Provide clear and consistent navigation options....
-
11B-403.5.1 Clear width
The clear width for aisles shall be 36 inches (914 mm) minimum if serving elements on only one side, and 44 inches (1118 mm) minimum if serving elements on both sides. 5. ...
-
Protruding Objects and Outdoor Recreation Access Routes
Accessibility guidelines do not consider natural elements (such as tree branches and rock formations) to be protruding objects....
-
PATH OF TRAVEL
Path of travel elements may be subject to upgrade as part of the alteration to an existing building if they do not conform to current accessibility requirements.◼ [ADA Titles II &...
-
Vehicular Route Exceptions—Sections 206.2.1 and 206.2.2 of the 2010 Standards
also contain an exception for accessibility within a site which provides that an ‘‘accessible route shall not be required between accessible buildings, accessible facilities, accessible elements...
-
Surfaces (R302.7) (Section-by-Section Analysis)
R302.7) (Section-by-Section Analysis) The proposed technical requirements for surfaces apply to pedestrian access routes, including curb ramps and blended transitions, and accessible elements...
-
The Advance Notice of Proposed Rulemaking
The public provided information on how to assess the cost of elements in small facilities, office buildings, hotels and motels, assembly areas, hospitals and long-term care facilities, residential...
-
11B-104.1.1 Construction and manufacturing tolerances
Where an element is to be installed at the minimum or maximum permitted dimension, such as "15 inches minimum" or "5 pounds maximum," it would not be good practice to specify "5 pounds (...
-
"Existing Facility" (Section-by-Section Analysis)
A newly constructed facility remains subject to the accessibility standards in effect at the time of design and construction, with respect to those elements for which, at that time, there...
-
11B-104.1.1 Construction and manufacturing tolerances
Where an element is to be installed at the minimum or maximum permitted dimension, such as "15 inches minimum" or "5 pounds maximum," it would not be good practice to specify "5 pounds (...
-
1134A.8 Lavatories, vanities, mirrors and towel fixtures
Plumbing protection. Water supply and drain pipes under lavatories shall be insulated or otherwise covered to protect against contact....
-
Pilot Rock APTX Full Sized Pedestal Rectangular Utility Tables Using Recycled Plastic
FINISH: Standard finish: hot dip galvanized after fabrication for maximum protection from elements. ...
