Recommendations: Space for turning within the work area and interior maneuvering clearances at doors, while not required, should be considered, especially where entrapment may be a concern...
Search Results "Vertical Clearance"
Filters
Commonly Searched Documents
-
Work Areas [4.1.1(3)]
-
1118B.3
Changes in level up to 1/4 inch (6.4 mm) may be vertical and without edge treatment [see Figure 11B-5E(c)]....
-
Mammography Equipment
2.It is best to position equipment to allow both front and side approaches; for some patients a side or angled approach may be better for positioning at the camera unit and plate. 3.Clearance...
-
11B-404.3 Automatic and power-assisted doors and gates
An automatic door may be used as equivalent facilitation when it is technically infeasible to provide sufficient strike-side clearance for code compliance, but a power-assisted door may...
-
Accessible Restrooms, Fitting Rooms, and Elevators
Remove trash receptacles and cigarette urns from under elevator hall call buttons and beside doors to ensure access to controls and sufficient maneuvering clearance....
-
Rough Grade Site Inspection
surface requirements along accessible routes, accessible parking and access aisles, etc. 11B-403 Verify if under-slab plumbing will provide adequate clearances...
-
Protruding Objects on Beach Access Routes
Provide and maintain clearance from natural elements around beach access routes in accordance with your unit's standards; keep in mind overhanging hazards to people who are blind or have...
-
Rough Grade Site Inspection
surface requirements along accessible routes, accessible parking and access aisles, etc. 11B-403 Verify if under-slab plumbing will provide adequate clearances...
-
Handrails Along Walking Surfaces [§403.6, §505]
Surface requirements and clearances facilitate a power grip along the length of handrails. Handrails can have circular or non-circular cross-sections, but must have rounded edges....
-
M301 Diagnostic Equipment Used by Patients in Supine, Prone, or Side-Lying Position; M302 Diagnostic Equipment Used by Patients in Seated Position
The sections also include provisions for clearance in and around the base of the equipment for lift compatibility to allow the use of a patient lift by patients with disabilities for whom...
-
Populas Infinity Workstation
Each mode allows quick, smooth height adjustment without intruding into leg and foot clearance spaces when not in use....
-
810.5.3 Platform and Vehicle Floor Coordination
The height and position of a platform must be coordinated with the floor of the vehicles it serves to minimize the vertical and horizontal gaps, in accordance with the ADA Accessibility...
-
Benches
Benches must be strong enough to withstand a vertical or horizontal force of 250 pounds applied at any point on the seat, fastener, mounting device, or supporting structure....
-
810.5.3 Platform and Vehicle Floor Coordination
The height and position of a platform must be coordinated with the floor of the vehicles it serves to minimize the vertical and horizontal gaps, in accordance with the ADA Accessibility...
-
Model Building Codes and Industry Standards
For example, unlike the ADA guidelines, the ANSI standards require an additional vertical grab bar at water closets, transfer shower stalls, and tubs....
-
§ 38.175(a)
Vertical alignment may be accomplished by car air suspension or other suitable means of meeting the requirement....
-
Jean Tessmer
Some of us prefer to mount to allow 28" knee clearance minimum to give the person in the wheelchair a lower shelf height of 32" depending on the thickness of your new #200 baby changer shelf...
-
Boat Slips: ADA Standard Section 1003.2.1
The vertical distance is 10 feet (3050 mm) between the elevation where the gangway departs the landside connection and the elevation of the pier surface at the lowest water level....
-
11B-1003.2.1 Boat slips
The vertical distance is 10 feet (3050 mm) between the elevation where the gangway departs the landside connection and the elevation of the pier surface at the lowest water level....
-
11B-206.2.8 Employee work areas
However, passenger elevators used for vertical transportation between stories are not considered "work area equipment" as defined in Chapter 2, Section 202. ◼...
-
Corbin Russwin Inc. ED3000 Series Crossbar Exit Device
The ED3000 is available as Rim, Mortise, and Surface Vertical Rod....
-
Hollaender ADA Handrail Systems: Grabrail (ADA Rail)
An ADA rail is the framework of (usually) two horizontal rails supported by vertical posts, manufactured from fittings and pipe....
-
PEMKO 5 5/16" Latching Panic Saddle Threshold No. 273x224-FGT
About Latching Panic Saddle Thresholds Latching Panic thresholds are designed to work in conjunction with surface applied vertical rod exit devices....
-
Landscape Forms Inc. FGP Trash Receptacle
Its cast aluminum rim and rotational-molded base are connected with vertical wood slats in between. The cast aluminum top is hinged to swing up for easy servicing....
