Retrofitted vehicles shall be coordinated with the platform in new and key stations such that the horizontal gap shall be no greater than 4 inches and the height of the vehicle floor, under...
Search Results "Vehicle Floor Coordination"
-
§ 38.73(d)(3) Exception
-
T603.3.1 Non-Rail Vehicles with Gross Vehicle Weight Rating Equal to or Greater than 30,000 lbs
On non-rail vehicles with a gross vehicle weight rating equal to or greater than 30,000 pounds (13,608 kg), wheelchair securement systems shall restrain a force in the forward longitudinal...
-
2.3 Restrooms
Are the restrooms accessible? Is the entry door at least 32 inches wide? Is there a larger stall or an area in the restroom at least 36 inches in...
-
A4.16.4 Grab Bars
Fig. A6(a) and (b) show the diagonal and side approaches most commonly used to transfer from a wheelchair to a water closet. Some wheelchair users can transfer from the front of the...
-
A4.16.4 GRAB BARS
Fig. A5(a) and (b) show the diagonal and side approaches most commonly used to transfer from a wheelchair to a water closet. Some wheelchair users can transfer from the front of the...
-
T208.2.1 Doorways on One Side of vehicle
Where non-rail vehicles have doorways on one side, a passenger access route shall connect each wheelchair space to a doorway that provides a means of accessible boarding and alighting in...
-
11B-703.4.1 Height above finish floor or ground
mm) maximum above the finish floor or ground surface, measured from the baseline of the highest line of raised characters...
-
11B-703.4.1 Height above finish floor or ground
mm) maximum above the finish floor or ground surface, measured from the baseline of the highest line of raised characters...
-
Detectable Warnings
The proposed rule, consistent with the original ADAAG, provided specifications for the coordination of vehicles and platforms, including maximum changes in level (plus or minus e inch) and...
-
3.1.3.1 Slope of Vehicle Parking Areas
The slope of vehicle parking areas shall not exceed 1:48 (2 percent) in any direction. Exception....
-
§ 38.173(b)
(b) Where the vehicle covered by paragraph (a) will operate in an accessible station, the design of vehicles shall be coordinated with the boarding platform design such that the horizontal...
-
224 Transient Lodging Guest Rooms
(1) Kitchens within housing units containing accessible sleeping rooms with mobility features (including suites and clustered sleeping rooms) or on floors containing accessible sleeping...
-
A4.17.3 Size and Arrangement
This section requires use of the 60 in (1525 mm) standard stall (Figure 30(a)) and permits the 36 in (915 mm) or 48 in (1220 mm) wide alternate stall (Figure 30(b)) only in...
-
SECTION 406 MOTOR-VEHICLE-RELATED OCCUPANCIES
SECTION 406 MOTOR-VEHICLE-RELATED OCCUPANCIES...
-
Clear floor space
Please provide a plan indicating locations of clear floor space to the side and front of bench as called for in 903.2....
-
SETTLEMENT AGREEMENT BETWEEN THE UNITED STATES OF AMERICA AND OLYMPIA ENTERTAINMENT, INC. REGARDING JOE LOUIS ARENA
SETTLEMENT AGREEMENT BETWEEN THE UNITED STATES OF AMERICA AND OLYMPIA ENTERTAINMENT, INC. REGARDING JOE LOUIS ARENA DJ# 202-37-197
-
5.1.5 Floor Height
Where the floor at the entrance to the camp shelter is elevated above the ground surface, the floor shall be 17 (430 mm) high minimum to 19 inches (485 mm) high maximum measured from the...
-
407.4.8.1.3 Floor Arrival
407.4.8.1.3 Floor Arrival. As the car passes a floor and when a car stops at a floor served by the elevator, the corresponding character shall illuminate....
-
203.9 Employee Work Areas
work areas, or portions of employee work areas, other than raised courtroom stations, that are less than 300 square feet (28 m2) and elevated 7 inches (180 mm) or more above the finish floor...
-
Check-Out Aisles and Sales and Service Counters
The 1991 Standards generally require sales and service counters to provide an accessible portion at least 36 inches long and no higher than 36 inches above the finish floor....