I have a question about older two-story office buildings that were built before the ADA and do not have an accessible route to the second floor....
Search Results "Vehicle Floor Coordination"
Commonly Searched Documents
-
Accessibility Requirements for Occasional Public Use on Second Floor of Older Office Buildings
-
Basic Components for Accessible and Usable Public and Common Use Areas or Facilities
[See subsections ...]
-
Transit Stops (R308.1) (Section-by-Section Analysis)
Where transit stops serve vehicles with more than one car, boarding and alighting areas serving each car must comply with these requirements....
-
T304.2 Height
Operable parts shall be located 24 inches (610 mm) minimum and 48 inches (1220 mm) maximum above the floor of non-rail vehicles....
-
Amusement Rides
Word Fillable Form (0.8MB) Word Non-Fillable Form (0.7MB) PDF Non-Fillable Form (0.5MB)
- Scranton Toilet Partitions: Eclipse - Floor Mount Headrail
-
Swanstone Barrier-Free Shower Floor FBF-3464
Requires the Premium User plan or above. (Login or upgrade your account!)
-
ASI Global Partitions Floor Anchored/Overhead Braced
Requires the Premium User plan or above. (Login or upgrade your account!)
-
1015.2 Where required
along open-sided walking surfaces, including mezzanines, equipment platforms, aisles, stairs, ramps and landings that are located more than 30 inches (762 mm) measured vertically to the floor...
-
Guidelines for Requirement 2
The basic components of public and common use areas covered by the Guidelines include, for example: accessible route(s); protruding objects; ground and floor surface treatments; parking...
-
§ 38.113(d)(1) Requirements
Cars which provide level-boarding in stations with high platforms shall be coordinated with the boarding platform or mini-high platform design such that the horizontal gap between a car...
- Kohler San Tropez® Vertical Spray Bidet with 4 Faucet Holes
-
Where Platform Lifts are Permitted [§206.7]
For example, an exterior or interior platform lift could be used to provide an accessible entrance or to coordinate interior floor levels at a new building constructed between and connected...
-
Controls
Consider push plates at least 3 inches in the least dimension since they do not require fine motor coordination or visual acuity to operate....
-
Pay Stations
Require-ments [sic] for operable parts cover clear floor space, operating characteristics, and location within accessible reach ranges....
- Impact Recovery Systems Parking Bollard Sign Post
-
11B-502.6 Identification
Signs shall be 60 inches (1524 mm) minimum above the finish floor or ground surface measured to the bottom of the sign. [2010 ADA Standards] 502.6 Identification....
-
§27.71(k)
(k) Shared-use automated airport kiosks provided in accordance with paragraph (j) of this section must conform to the following technical accessibility standards with respect to...
-
§ 27.71(k)
(k) Shared-use automated airport kiosks provided in accordance with paragraph (j) of this section must conform to the following technical accessibility standards with respect to...
-
T402.11 Gaps
When ramps or bridgeplates are deployed for boarding and alighting, gaps between the ramp or bridgeplate surface and floor of non-rail vehicles shall not permit passage of a sphere more...
-
§ 38.81(b)
stepwells, and doorways with lifts, ramps or bridge plates, shall have, at all times, at least 2 foot-candles of illumination measured on the step tread or lift or ramp, when deployed at the vehicle...
-
305 Clear Floor or Ground Space
Section 305 provides requirements for the basic space allocation for an occupied wheelchair. Few comments addressed this section, and no substantive changes have been made.