Other Counters/ Teller Windows [7.2(2)] Alternatives to 36-inch high counters (lowered portions, folding shelves) are recognized since other design considerations (security, use...
Search Results "Door Height"
-
Other Counters/ Teller Windows [7.2(2)]
-
REDUCTION AND ANALYSIS OF DATA
The ADAAG set minimum criteria for accessibility of pedestrian facilities throughout the United States. By law, States and local jurisdictions are required to follow ADAAG when...
-
A4.15.2
Drinking fountains with two spouts can assist both handicapped people and those people who find it difficult to bend over.
-
11B-407.2.3.1 Floor designation
Floor designations complying with Sections 11B-703.2 and 11B-703.4.1 shall be provided on both jambs of elevator hoistway entrances. Floor designations shall be provided in both...
-
11B-407.2.3.1 Floor designation
Floor designations complying with Sections 11B-703.2 and 11B-703.4.1 shall be provided on both jambs of elevator hoistway entrances. Floor designations shall be provided in both...
-
407.2.3.1 Floor Designation
Floor designations complying with 703.2 and 703.4.1 shall be provided on both jambs of elevator hoistway entrances. Floor designations shall be provided in both tactile characters...
-
407.2.3.1 Floor Designation
407.2.3.1 Floor Designation. Floor designations complying with 703.2 and 703.4.1 shall be provided on both jambs of elevator hoistway entrances. Floor designations shall be provided...
-
7(2)(a)(i)
(i) Sufficient maneuvering space is provided within the bathroom for a person using a wheelchair or other mobility aid to enter and close the door, use the fixtures, reopen the door and...
-
406.2.2 Clear height
The clear height of each floor level in vehicle and pedestrian traffic areas shall be not less than 7 feet (2134 mm)....
-
T208.2 Connection to Doorways
A passenger access route shall connect each wheelchair space to doorways that provide a means of accessible boarding and alighting in accordance with T208.2.
-
T502.2.1 Over-the-Road Buses
For over-the-road buses, the vertical clearance at doorways shall be 65 inches (1650 mm) minimum.
-
T208 Passenger Access Routes
[See subsections ...]
-
T503.1 General
Illumination shall be provided at ramps, bridgeplates, doorways, and boarding and alighting areas in accordance with T503. Lights shall be shielded so as not to project directly into...
-
§ 35.151(b)(4)(i)(B)
(B) For the purposes of this section, alterations to windows, hardware, controls, electrical outlets, and signage shall not be deemed to be alterations that affect the usability of...
-
§ 35.151(b)(4)(i)(B)
(B) For the purposes of this section, alterations to windows, hardware, controls, electrical outlets, and signage shall not be deemed to be alterations that affect the usability of...
-
Door King Inc. Proximity Card Readers
Door King offers the following proximity card reader products: DK Prox, HID and AWID proximity card readers, all of which are compatible with the 1830 Series access controllers....
-
Attachment H: Modifications to Altered Facilities
Attachment H: Modifications to Altered Facilities
-
Doorbell Factory Small Rectangle Stainless Steel Doorbell
It blends with both black and stainless steel door hardware, and projects a sleek, uncomplicated feel to your entryway....
-
Kawneer North America 350/500 Tuffline™ Entrances
stiles (500 Tuffline™ Entrances) with 2" (50.8) deep door sections on both Door heights range from 7 to 9 feet; widths from 3 to 4 feet Door frame face width is 2" (50.8) and depth...
-
Single-User Toilet Rooms: Side Transfer Space
Doors must comply with 4.13, which specifies maneuvering clearances. The location of doors is based on their size and sweep....
-
Hager Companies Square Corner Rounded Bevel Pull Plate 103G
Square Corner Rounded Bevel Pull Plate 103G Description: - Square Corner Rounded Bevel - 100T plate - 3G pull Materials: - Aluminum, brass, bronze, stainless steel
-
Hager Companies Radius Corner Pull Plate 92J
Radius Corner Pull Plate 92J Description: - Radius Corner - 90R plate - 2J pull Materials: - Aluminum, brass, bronze, stainless steel
-
Hager Companies Square Corner Rounded Bevel Pull Plate 103E
Square Corner Rounded Bevel Pull Plate 103E Description: - Square Corner Rounded Bevel - 100T plate - 3E pull Materials: - Aluminum, brass, bronze, stainless steel
-
Hager Companies Rounded Corner Pull Plate 82J
Rounded Corner Pull Plate 82J Description: - Rounded Corner - 80S plate - 2J pull Materials: - Aluminum, brass, bronze, stainless steel
