inclusion of all people living with disabilities into society and encourage our consumers and the community at large to seek involvement in this self-governing organization to the fullest extent...
Search Results "Feasibility (Technical, Infeasible, Structural, Maximum Extent)"
Commonly Searched Documents
- DIAL, Inc. - Clifton, NJ
-
T403 Lifts
The technical requirements for lifts have been substantially revised in the 2016 Non-Rail Vehicle Guidelines....
- California Division of the State Architect (DSA)
-
11B-813.2.10 Door swing
A door, in any position, shall be permitted to encroach into the turning space by 12 inches (305 mm) maximum....
-
11B-407.2.1.1 Height
[2010 ADA Standards] EXCEPTION: Existing call buttons and existing keypads shall be permitted to be located at 54 inches (1370 mm) maximum above the finish floor, measured to the centerline...
-
11B-407.4.8.2.1 Signal type
Exception: For elevators that have a rated speed of 200 feet per minute (1 m/s) or less, a non-verbal audible signal with a frequency of 1500 Hz maximum which sounds as the car passes or...
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
ADDITIONAL NOTES FOR EXISTING FACILITIES {35.150}
ADDITIONAL NOTES FOR EXISTING FACILITIES {35.150} No requirement to make structural changes where other methods are effective in achieving compliance Alterations to existing...
-
REMOVAL OF BARRIERS
A public accommodation shall remove architectural barriers in existing facilities, including communication barriers that are structural in nature, where such removal is readily achievable...
-
F233.1 General
For example, the Fair Housing Act requires that certain residential structures having four or more multi-family dwelling units, regardless of whether they are privately owned or federally...
-
202.3.1 Prohibited Reduction in Access
Those regulations state: “If the 2010 Standards reduce the technical requirements or the number of required accessible elements below the number required by the 1991 Standards, the technical...
-
ADA Guide for Small Towns
Disclaimer The ADA authorizes the Department of Justice to provide technical assistance to individuals and entities that have rights or responsibilities under the Act....
-
F244.2.3 Elements within Camping Units with Mobility Features
Where these elements are provided within a camping unit, at least one of each type of element is required to comply with the applicable technical requirements for the element....
-
1017.9 Protruding Objects
This section requires constructed elements on trails, resting intervals, and passing spaces to comply with the technical requirements for protruding objects in 307 of the Architectural Barriers...
- Kompan, Inc. Miram GXY926
-
11B-705.1.1.1 Dome size
Truncated domes in a detectable warning surface shall have a base diameter of 0.9 inch (22.9 mm) minimum and 0.92 inch (23.4 mm) maximum, a top diameter of 0.45 inch (11.4 mm) minimum and...
- Pilot Rock PQT3-4 Square Pedestal Table Using Aluminum
-
504.5 Nosings
The radius of curvature at the leading edge of the tread shall be ½ inch (13 mm) maximum....
-
504.5 Nosings
The radius of curvature at the leading edge of the tread shall be 1/2 inch (13 mm) maximum....
-
11B-607.4.1.1 Back wall
Two grab bars shall be installed on the back wall, one located in accordance with Section 11B-609.4 and the other located 8 inches (203 mm) minimum and 10 inches (254 mm) maximum above the...
-
11B-607.4.1.1 Back wall
Two grab bars shall be installed on the back wall, one located in accordance with Section 11B-609.4 and the other located 8 inches (203 mm) minimum and 10 inches (254 mm) maximum above the...
-
§382.119(a)
themselves as needing visual or hearing assistance have prompt access to the same information provided to other passengers on the aircraft as described in paragraph (b) of this section, to the extent...
-
§100.143(b)(2)
(2) Assess the extent and scope of any likely violation, by determining which areas of operation are likely to be affected by those policies and practices, such as stages of the loan application...
-
4.1.1 General
prohibits full compliance with a specific requirement for clear floor or ground space surface slope, size, or location, the clear floor or ground space shall comply with requirements to the extent...