[See subsections ...]
Search Results "Ground Surface"
-
Figure M3: Overview of M302 Diagnostic Equipment for Use by a Patient in a Seated Position
-
Figure M1: Overview of M301 Diagnostic Equipment for Use by a Patient in a Supine, Prone, or Side-Lying Position
[See subsections ...]
-
5.3.2.1 Transfer Sides Recommendation for Stretchers
5.3.2.1 Transfer Sides Recommendation for Stretchers On stretchers, the transfer surface is oriented along the long dimension of the surface on which patients are in the supine, prone...
-
Other Counters/ Teller Windows [7.2(2)]
Windows [7.2(2)] Alternatives to 36-inch high counters (lowered portions, folding shelves) are recognized since other design considerations (security, use by standees) may make a higher surface...
-
5.3.3 Transfer Sides for Equipment Used by Patients in Seated Position
5.3.3 Transfer Sides for Equipment Used by Patients in Seated Position.
-
5.3.3.1 Transfer Sides for Exam Chairs with Fixed Footrests
5.3.3.1 Transfer Sides for Exam Chairs with Fixed Footrests. The 17 inch minimum depth and 21 inch minimum width should be located on both sides of examination chairs with a fixed...
-
Addendum E: Comparison of participants tested at the National Disabled Veterans Winter Sports Clinic (NDVWSC) compared to the participants tested at the Human Engineering Research Laboratories and Hiram G. Andrews Center
At the time this addendum was composed, there were 31 participants enrolled in the phase 2 study at HERL (27 men and 4 women). This group of subjects was compared to all the...
-
Kitchen Cabinets
42” a.f.f. (above finished floor) wall-mounted cabinets and counters for tall people. With a remodel, they can be lowered to 32” a.f.f. for wheelchair users 10”...
-
9.2* POST OFFICE LOBBIES
Where writing desks or tables are provided, a minimum of at least one writing desk or table that complies with 4.32 must be provided. Clear passageways in front of customer service...
-
Circular Cross Section and Clearance (§505.5, §505.7)
Circular Cross Section and Clearance (§505.5, §505.7)
-
Clear Space Evaluation
to the right of the station allows them to use their right side as the trailing arm which carries more of the force during a transfer than does the leading arm when moving toward a new surface...
- Kompan, Inc. ELE400205 - Cottage Playhouse
- GameTime Spiral Game Table
- Kompan, Inc. ELE400101 - Ministudio Sand Play Structure
- Magnuson Group MECORA Outdoor Waste Receptacle
-
5.3.2.1 Transfer Sides for Stretchers
The transfer surface shall be located to provide the ability to transfer from a mobility device onto both long sides of the surface....
- Pilot Rock CN-TR-52 Tilting Trash Receptacle
-
§ 382.23 Airport facilities
(a) This section applies to all terminal facilities and services owned, leased, or operated on any basis by an air carrier at a commercial service airport, including parking and ground transportation...
- Where to Measure Along the Route
- Pilot Rock CN-Q/D-32/2 Square Trash Receptacle Expanded Steel
-
11B-226.4 Baby changing tables
If they must be modified, for example, to comply with the maximum work surface height of 34 inches, their noncompliant location (i.e., inside an accessible water closet compartment, or obstructing...
-
M305.2.1.1 End Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.1 and M302.2 shall be located on the short side (length) opposite the transfer side....
-
M301.2.2 Sunset Provision (Section-by-Section Analysis)
(Significant Changes – Transfer Surface Adjustability), this is a new provision that was added to the final rule in conjunction with the new requirement of a low height range in M301.2.1...
-
Parking Spaces: ADA Standard Section 502
Section 502 covers the current ADA Standards for accessible parking spaces.
