(e) In any situation using a combination of high and low platforms, a commuter or intercity rail operator shall not employ a solution that has the effect of channeling passengers into a...
Search Results "Commuter Carrier"
Filters
Commonly Searched Documents
-
§ 37.42(e)
-
810.5.3 Platform and Vehicle Floor Coordination
Note to Reader: The Department of Transportation’s ADA standards note permitted alternatives where compliance is not operationally or structurally feasible in light rail, commuter rail,...
-
Accommodations for Passengers Who are Deaf or Hard of Hearing
Accommodations for Passengers Who are Deaf or Hard of Hearing If the safety briefings are presented to passengers on video screens, carriers must ensure that the video presentation is...
-
382.29 May a carrier require a passenger with a disability to travel with a safety assistant?
382.29 May a carrier require a passenger with a disability to travel with a safety assistant?...
-
§ 382.43 Treatment of mobility aids and assistive devices
(a) When wheelchairs or other assistive devices are disassembled by the carrier for stowage, the carrier shall reassemble them and ensure their prompt return to the individual with a disability...
-
§ 37.87 Purchase or lease of used intercity and commuter rail cars
[56 FR 45621, Sept. 6, 1991, as amended at 58 FR 63102, Nov. 30, 1993]
-
§382.57(b)(5)
(5) As a carrier, you are jointly and severally liable with airport operators and/or other participating carriers for ensuring that shared-use automated airport kiosks are compliant with...
-
§ 382.57(b)(5)
(5) As a carrier, you are jointly and severally liable with airport operators and/or other participating carriers for ensuring that shared-use automated airport kiosks are compliant with...
-
§ 37.42(b)
(b) For new or altered stations serving commuter, intercity, or high-speed rail lines or systems, in which no track passing through the station and adjacent to platforms is shared with existing...
-
§ 37.42(b)
(b) For new or altered stations serving commuter, intercity, or high-speed rail lines or systems, in which no track passing through the station and adjacent to platforms is shared with existing...
-
QUESTION: WHEN DO THE REQUIREMENTS OF SECTION 37.42 BEGIN TO APPLY?
FTA anticipates that there will be no commuter rail New Starts projects being approved for entry into final design before February 1, 2012....
-
C. Mobility Aids and Assistive Devices
If, in assisting a passenger with a disability, a carrier employee or contractor takes apart the passenger’s mobility aid or assistive device (e.g., a wheelchair), another carrier employee...
-
§ 37.42(a)
(a) In addition to meeting the requirements of sections 37.9 and 37.41, an operator of a commuter, intercity, or high-speed rail system must ensure, at stations that are approved for entry...
-
§ 37.42(a)
(a) In addition to meeting the requirements of sections 37.9 and 37.41, an operator of a commuter, intercity, or high-speed rail system must ensure, at stations that are approved for entry...
-
382.131 Do baggage liability limits apply to mobility aids and other assistive devices?
Carriers and passengers should note that section 382.131 applies only to domestic U.S. travel....
-
§ 38.95(c)(6) Attachment
(6) Attachment—.
-
§ 38.95(c) Car ramp or bridge plate
(c) Car ramp or bridge plate—
-
§ 38.95(b)(12) Use by standees
(12) Use by standees. Lifts shall accommodate persons using walkers, crutches, canes or braces or who otherwise have difficulty using steps. The lift may be marked to indicate a...
-
§ 38.95(c)(1) Design load
(1) Design load. Ramps or bridge plates 30 inches or longer shall support a load of 600 pounds, placed at the centroid of the ramp or bridge plate distributed over an area of 26...
-
§ 38.95(b)(3) Emergency operation
(3) Emergency operation. The lift shall incorporate an emergency method of deploying, lowering to ground or platform level with a lift occupant, and raising and stowing the empty...
-
§ 38.95(c)(7) Stowage
(7) Stowage. A compartment, securement system, or other appropriate method shall be provided to ensure that stowed ramps or bridge plates, including portable ramps or bridge plates...
-
§ 38.95(b)(1) Design load
(1) Design load. The design load of the lift shall be at least 600 pounds. Working parts, such as cables, pulleys, and shafts, which can be expected to wear, and upon which the lift...
-
§ 38.95(b)(2) Controls
(2) Controls—
-
§ 38.99 Floors, steps and thresholds
[See subsections ...]