designed with a cooktop or sink located at the base of the U, which provides a knee and toe space in accordance with Section 1133A.7 to allow for a forward approach, shall have a clear width...
Search Results "Character Width (VMS)"
-
1133A.2.1, Item 2
-
4.9.2 TREADS AND RISERS
On any given flight of stairs, all steps shall have uniform riser heights and uniform tread widths....
-
1133A.2.1, Item 2
designed with a cooktop or sink located at the base of the U, which provides a knee and toe space in accordance with Section 1133A.7 to allow for a forward approach, shall have a clear width...
-
§ 38.25(b) Contrast
All step edges, thresholds and the boarding edge of ramps or lift platforms shall have a band of color(s) running the full width of the step or edge which contrasts from the step tread and...
-
Boolee Multi-Station Voting Booth
Twin With ADA Compliant Station Height: 60" Depth: 24" Width: 59" Tables: 18x25.5" 18x29" Table Heights: 39.5 - 32.5" Folded Width: 7.0" Weight: 22 lbs...
-
Scope: ADA Standard Section 201.1
Section 201 discusses the scope of the ADA Standards.
-
1. Desk size
To provide adequate knee and leg clearance, desks and writing tables need to have at least 30 inches of knee width, 29 inches of knee height, and 19 inches of leg depth....
-
502 Parking Spaces
Substantive changes pertain to the: width of spaces, including van spaces, and access aisles (502.1 and 502.2) location of access aisles for angled van spaces (502.3.4)...
-
Public Way
parcel of land open to the outside air leading to a public street, which has been deeded, dedicated or otherwise permanently appropriated to the public for public use and which has a clear width...
-
11B-607.5 Controls
Controls shall be between the bathtub rim and grab bar, and between the open side of the bathtub and the centerline of the width of the bathtub....
-
4.3.4 Passing Space
If an accessible route has less than 60 in (1525 mm) clear width, then passing spaces at least 60 in by 60 in (1525 mm by 1525 mm) shall be located at reasonable intervals not to exceed...
-
4.3.4 PASSING SPACE
If an accessible route has less than 60 in (1525 mm) clear width, then passing spaces at least 60 in by 60 in (1525 mm by 1525 mm) shall be located at reasonable intervals not to exceed...
-
Rockwood Manufacturing Company K1038 .038" Thick - Metal Kick Plate
Material: .038" Aluminum, Stainless Steel Fastener: #6 x 5/8 OH SMS Ordering: Specify height x width x finish code. Add any options. Weight: 8" x 34" = 3.2 lbs....
-
11B-705.2 Detectable directional texture
The width of the directional texture shall be equal to the width of the transit vehicle’s door opening. The depth of the texture shall not be less than 36 inches (914 mm)....
-
810.2.2 Dimensions
Bus stop boarding and alighting areas shall provide a clear length of 96 inches (2440 mm) minimum, measured perpendicular to the curb or vehicle roadway edge, and a clear width of 60 inches...
-
402.2 Components
., Florida requirements, except s.553.5041(5)(a) width of accessible route to parking and s.553.041(c)1 parking space and access aisle width, may be waived down to the requirements of the...
-
Protruding Objects on Beach Access Routes
Outdoor accessibility guidelines define protruding objects as constructed features such as signs that extend into the clear width area of a beach access route or resting interval and are...
-
Beach Access Routes
The proposed rule would have required the clear width of beach access routes to be 36 inches minimum....
-
2.2.4 Maneuverability
Widths of the restricted space were set at a minimum of 750 mm (30 in.) for the 90-degree turn, 750 mm (30 in.) passage width for the U-turn with a barrier, and 1300 mm (51 in.) for the...
-
11B-705.2 Detectable directional texture
The width of the directional texture shall be equal to the width of the transit vehicle’s door opening. The depth of the texture shall not be less than 36 inches (914 mm)....
-
FIGURE INDEX
of an Accessible Route Figure 403.5.2 Clear Width at Turn Figure 404.2.3 Clear Width of Doorways Figure 404.2.4.1 Maneuvering Clearances at Manual Swinging Doors and...
-
American Safety Tread Co., Inc. Type G4702 Stairway Nosing Replacement
Width: 5" Lip: 1-3/8" at 90° angle Thickness: 1/4" Anchor Options: Drilled for screws. Standard Width: 5"...
-
810.9 Escalators
Where provided, escalators shall comply with the sections 6.1.3.5.6 and 6.1.3.6.5 of ASME A17.1 (incorporated by reference, see "Referenced Standards" in Chapter 1) and shall have a clear width...
-
Kickplates
If provided, it is recommended that they cover almost the full door width up to a height of 16 inches from the bottom edge....
