Section 603.3 covers the current ADA Standards for mirrors in toilet and bathing rooms.
Search Results "Ground Floor"
Filters
Commonly Searched Documents
-
Mirrors: ADA Standard Section 603.3
-
Unobstructed: ADA Standard Section 308.3.1
Section 308.3.1 covers the current ADA Standards for unobstructed side reach.
-
11B-603.3 Mirrors
Mirrors located above lavatories or countertops shall be installed with the bottom edge of the reflecting surface 40 inches (1016 mm) maximum above the finish floor or ground....
-
11B-703.8.9 Height above floor
11B-703.8.9 Height above floor. Low resolution VMS characters shall be 40 inches (1016 mm) minimum above the floor of the viewing position, measured to the baseline of the character. ...
-
11B-703.8.9 Height above floor
11B-703.8.9 Height above floor. Low resolution VMS characters shall be 40 inches (1016 mm) minimum above the floor of the viewing position, measured to the baseline of the character....
-
Maneuvering Space, Adjustable Cabinetry, Fixtures and Plumbing
Comment. A number of commenters from the disability community stated that it was important that the Guidelines for both kitchens and bathrooms specify a five-foot turning radius;...
-
5.8.2.6 Clearance Depth at Toe Height Above the Ground
5.8.2.6 Clearance Depth at Toe Height Above the Ground. The toe clearance depth should be 22 inches minimum at toe height....
-
Moving to the House Floor
Moving to the House Floor The ADA proceeded rapidly to the House floor after the Judiciary Committee completed its work....
-
Signaids Floor Numbering and Stair Shaft Designation-Style 2
FLOOR NUMBERING & STAIR SHAFT DESIGNATION - Braille and Tactile Style 2 - 240mm x 240mm - Gr. 1 Braille and Tactile sign - AODA Compliant (Canada) - Available...
-
Signaids Floor Numbering and Stair Shaft Designation-Style 1
FLOOR NUMBERING & STAIR SHAFT DESIGNATION - Braille and Tactile Style 1 - 190mm x 130mm - Gr. 1 Braille and Tactile sign - AODA Compliant (Canada) - Available in 3 styles...
-
D. Clear Floor Space
If there is a vestibule without fully automatic doors, is there a 30"x48" clear floor space where one can be outside the swing of a hinged door (i.e.: for out-swinging doors, at least 7'...
-
5.8.2.4 Unobstructed Floor Space Recommendation
5.8.2.4 Unobstructed Floor Space Recommendation The Committee recommends the unobstructed floor space in front of the base support be a minimum of 17 inches deep....
-
5. Bed with clear floor space
Bed with clear floor space for a side approach next to bed....
-
C. Clear Floor Space
When there is a vestibule into the public or employee restroom that does not have fully automatic doors, is there a 30"x48" clear floor space where one can be outside the swing of a hinged...
-
Clear floor space
Please provide a plan indicating locations of clear floor space to the side and front of bench as called for in 903.2....
-
Access Board: Standard Roll In Shower Stalls
This video is part of a longer animation produced by the U.S. Access Board. View the animation video in its entirety on the Access Board's website...
-
11B-217.4.2 Floor requirement
TTYs in public buildings shall be provided in accordance with Section 11B-217.4.2.1. TTYs in private buildings shall be provided in accordance with Section 11B-217.4.2.2.
-
Whitehall Mfg. WH2105BAR Bariatric Toilet Siphon Jet Type Off-Floor
14 gage 304 stainless steel off-floor Siphon Jet toilet features reinforced housing to withstand up to 1,000 lbs with optional carrier....
-
Pricilla Rogers, Ph.D., Center on Vision Loss, American Foundation for the Blind
Use the flooring to create a building map such as the use of differences in flooring texture and color contrast. Use of contrast on door frames....
-
1.16 Traditional, sloped-floor or traditional seating
1.16 "Traditional, sloped-floor" or "traditional seating" shall mean and refer to the section of an auditorium in which the seats are not affixed on risers, but are instead affixed to...
-
11B-306.3.1 General
Space under an element between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground shall be considered knee clearance and shall comply with Section 11B-306.3....
