The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
Search Results "Designated Agent"
Filters
Commonly Searched Documents
-
11B-1009.2.4 Seat
-
407.7 Color (Section-by-Section Analysis)
The use of color is also addressed in existing 508 Standards § 1194.22(c), which requires that Web pages “be designed so that all information conveyed with color is also available without...
-
Grab Bars [4.16.4]
Alternative designs, such as movable grab bars, were considered when ADAAG was developed but information and consensus was lacking on their usefulness and performance....
-
F244.2.1 Alterations and Additions
Where an entity is implementing a transition plan for program accessibility developed pursuant to regulations issued under section 504 of the Rehabilitation Act that designates specific...
-
Shape and Diameter
Large sections, particularly those of rectangular design, are not as graspable as smaller circular sections. A gripping surface width between 1¼ to 1½ inches diameter is specified....
-
F245.2.3 Alterations and Additions
Where an entity is implementing a transition plan for program accessibility developed pursuant to regulations issued under section 504 of the Rehabilitation Act that designates specific...
-
205 Operable Parts
1991 Standards for Accessible Design 2010 Standards for Accessible Design What’s New/Different 4.1.3(13) Controls...
-
223 Medical Care and Long-Term Care Facilities
1991 Standards for Accessible Design 2010 Standards for Accessible Design What’s New/Different 6.1 General....
-
If a public accommodation determines that its facilities have barriers that should be removed, but it is not readily achievable to undertake all of the modifications now, what should it do?
The Department recommends that a public accommodation develop an implementation plan designed to achieve compliance with the ADA's barrier removal requirements....
-
Bathtub
As getting in and out of a tub is generally considered to be a falls risk for individuals, designers were not encouraged to promote independent bathing in eldercare facilities....
-
Required Compliance [§209]
Compliance is required only where areas are specifically designed or designated for passenger loading, such as those at airports, many hotels, and convention centers....
-
103 Equivalent Facilitation
103 Equivalent Facilitation Nothing in these requirements prevents the use of designs, products, or technologies as alternatives to those prescribed, provided they result in substantially...
-
Online Barriers Faced By People with Disabilities
Poorly designed websites can create unnecessary barriers for people with disabilities, just as poorly designed buildings prevent some from entering....
-
M303.2.1 Orientation (Section-by-Section Analysis)
The MDE NPRM proposed to require wheelchair spaces to be designed so that a patient in a wheelchair using diagnostic equipment would be oriented in the same direction that other non-wheelchair...
-
224.1 General
Residential dwelling units that are designed, constructed, and utilized exclusively for residential use are not subject to the transient lodging standards. 2....
-
203.8 Residential Facilities, F203.9 Residential Facilities
The final rule revises the exception to also apply to common use areas that do not serve emergency transportable housing unit pads designed and constructed to accept the installation of...
-
203.9 Employee Work Areas
Spaces and elements within employee work areas shall only be required to comply with 206.2.8, 207.1, and 215.3 and shall be designed and constructed so that individuals with disabilities...
-
Guidelines as Minimum Requirements
Given this fact, it would be inappropriate on the part of the Department to constrain designers by presenting the Fair Housing Accessibility Guidelines as minimum requirements....
-
A. Title III of the ADA and its Implementing Regulations
Discrimination includes a failure to design or construct facilities, or make alterations to the maximum extent feasible, that are “readily accessible to and usable by individuals with disabilities...
-
Free Technical Assistance
You may also order the ADA Standards for Accessible Design and other ADA publications, including regulations for private businesses or State and local governments, at any time day or night...
-
Section 35.171 Acceptance of complaints. (Section-by-Section Analysis)
language in § 35.171(a)(2)(i) regarding misdirected complaints to make it clear that if an agency receives a complaint for which it lacks jurisdiction either under section 504 or as a designated...
-
11B-404.1 General
Doors, doorways, and gates designed to be operated only by security personnel shall not be required to comply with Sections 11B-404.2.7, 11B-404.2.8, 11B-404.2.9, 11B-404.3.2 and 11B-404.3.4...
-
11B-1008.4.2 Clear floor or ground space
Where play components include a seat or entry point, designs that provide for an unobstructed transfer from a wheelchair or other mobility device are recommended....
-
Classroom Acoustics
The standard, completed in 2002, has been approved as ASA/ANSI S12.60‒2002, Acoustical Performance Criteria, Design Requirements and Guidelines for Schools....