Urinals in compartments shall have the centerline of the urinal located 17 inches (432 mm) minimum to 18 inches (457 mm) maximum from the side wall or partition....
Search Results "Patient in Side-Lying Position"
-
11B-605.5.1 Urinal location
-
1009.7.3 Openness
The sides other than the separation walls shall be not less than 50 percent open, and the open area shall be distributed so as to minimize the accumulation of smoke or toxic gases....
-
11B-607.5 Controls
Controls shall be between the bathtub rim and grab bar, and between the open side of the bathtub and the centerline of the width of the bathtub....
-
Types of Alternative Designs
The positioning and type of grab bars were also changed to provide more room and flexibility....
-
1630.2(o)(1)(II)
(II) Modifications or adjustments to the work environment, or to the manner or circumstances under which the position held or desired is customarily performed, that enable a qualified individual...
-
1630.16(c)(2)(ii)
(ii) Remove from safety-sensitive positions persons who test positive for illegal use of drugs or on-duty impairment by alcohol pursuant to paragraph (c)(2)(i) of this section....
-
1630.16(b)(6)
(6) May require that employees employed in sensitive positions comply with the regulations (if any) of the Departments of Defense and Transportation and of the Nuclear Regulatory Commission...
-
§1630.16(c)(2)(ii)
(ii) Remove from safety-sensitive positions persons who test positive for illegal use of drugs or on-duty impairment by alcohol pursuant to paragraph (c)(2)(i) of this section....
-
§1630.16(b)(6)
(6) May require that employees employed in sensitive positions comply with the regulations (if any) of the Departments of Defense and Transportation and of the Nuclear Regulatory Commission...
-
Rheumatoid Arthritis Support Network (RASN) - Orlando, FL
Many patients suffer from daily pain, inflammation, and growing medical costs without fully understanding their condition....
-
Car Dimensions: ADA Standard Section 407.4.1
Section 407.4.1 covers the current ADA Standards for elevator car dimensions.
-
1630.2(n)(1)
(1) In general, the term essential functions means the fundamental job duties of the employment position the individual with a disability holds or desires....
-
804.6.3 Dishwasher
Clear floor or ground space shall be positioned adjacent to the dishwasher door....
-
§1630.2(o)(1)(ii)
(ii) Modifications or adjustments to the work environment, or to the manner or circumstances under which the position held or desired is customarily performed, that enable an individual...
-
§1630.2(n)(1) In general
The term essential functions means the fundamental job duties of the employment position the individual with a disability holds or desires....
-
§ 36.303(d)(2)
(2) A public accommodation that offers a customer, client, patient, or participant the opportunity to make outgoing telephone calls using the public accommodation's equipment on more than...
-
Refrigerator/Freezer: ADA Standard Section 804.6.6
The clear floor or ground space shall be positioned for a parallel approach to the space dedicated to a refrigerator/freezer with the centerline of the clear floor or ground space offset...
-
11B-804.6.6 Refrigerator/freezer
The clear floor or ground space shall be positioned for a parallel approach to the space dedicated to a refrigerator/freezer with the centerline of the clear floor or ground space offset...
-
11B-804.6.6 Refrigerator/freezer
The clear floor or ground space shall be positioned for a parallel approach to the space dedicated to a refrigerator/freezer with the centerline of the clear floor or ground space offset...
-
404.2.8.1 Door Closers and Gate Closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
404.2.8.2 Spring Hinges
Door and gate spring hinges shall be adjusted so that from the open position of 70 degrees, the door or gate shall move to the closed position in 1.5 seconds minimum....
-
11B-404.2.8.1 Door closers and gate closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
11B-404.2.8.1 Door closers and gate closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
404.2.7 Door and Gate Hardware
Where sliding doors are in the fully open position, operating hardware shall be exposed and usable from both sides. [ECTCR UFAS 4.13.9] EXCEPTIONS: 1....
