Wheelchair spaces shall include toe clearance 9 inches (230 mm) high minimum above the floor measured to a depth of 6 inches (150 mm) maximum measured from the toe end of the wheelchair...
Search Results "Unit of Measurement"
Filters
Commonly Searched Documents
-
M303.2.4.2.2 Height
-
3 [§ 4.3.7]
Unlike the running slope, which runs along the ramp, the cross slope is measured across the ramp....
-
§104.35(b)(3)
student with impaired sensory, manual, or speaking skills, the test results accurately reflect the student's aptitude or achievement level or whatever other factor the test purports to measure...
-
Performance for Surface Firmness and Stability
The baseline measurements affirmed the RP was operable and calibrated....
-
Willoughby Industries ETW-1445-BS-HC Toilet for 45-degree Chase Wall
Fixture shall withstand loadings up to 2,000 lbs. with no measurable deflection and loadings up to 5,000 lbs. with no permanent damage....
-
2. Analysis of footrest clearance height and depth
Front castor and footrest measurements were available for 67 power wheelchair users (excluding front-wheel drives for this analysis, due to time constraints)....
-
Sec.36.309(b)(1)(i)
impairs sensory, manual, or speaking skills, the examination results accurately reflect the individual's aptitude or achievement level or whatever other factor the examination purports to measure...
-
RECOMMENDATIONS
RECOMMENDATIONS An objective test procedure for measuring the firmness and stability of surfaces with a portable device and performance specifications need to be accepted in order to...
-
6.9 Tread Obstacles
Obstacles on beach access routes and their related resting intervals shall not exceed 1 inch (25 mm) in height measured vertically to the highest point....
-
Transits and construction lasers
Transits and construction lasers are useful for setting or measuring overall elevation points to determine a total slope....
-
F. Publicity
To the extent any advertising is “in-kind,” Olympia’s compliance with this paragraph shall be measured by the fair market value of the advertising time used. ...
-
Identification [§216.5, §502.6]
Signs must be at least 60” high measured to the bottom edge so that they are visible while vehicles are parked in a space....
-
AVAILABLE DATA DO NOT SUPPORT DEPARTING FROM THE CURRENTLY ACCEPTED STANDARD OF 19-INCH TRANSFER SURFACE HEIGHT
There is a recognized international standard defining various measurements of wheelchairs: ISO 7176-7:1998 Wheelchairs — Part 7: Measurement of seating and wheel dimensions....
-
11B-306.1 General
Clearances are measured in relation to the usable clear floor space, not necessarily to the vertical support for an element....
-
Issue 4: Based on available references, can we develop “viable” design standards and guidelines”?
Must they be written in terms of measurable parameters and values? Consensus was not obvious. Must they be written in terms of measurable parameters and values?...
-
§104.42(b)(3)(i)
handicap that impairs sensory, manual, or speaking skills, the test results accurately reflect the applicant's aptitude or achievement level or whatever other factor the test purports to measure...
-
§ 36.309(b)(1)(i)
impairs sensory, manual, or speaking skills, the examination results accurately reflect the individual´s aptitude or achievement level or whatever other factor the examination purports to measure...
-
RESEARCH OBJECTIVES
Objectively measure the firmness and stability of the test surfaces; 3....
-
Double Action Door Pressure Gauge
Double Action Door Pressure Gauge This Door Pressure Gauge, available from Evan Terry Associates, has Push-Pull capability and measures forces from 0-35 pounds on one side and 0-16...
-
How to Use this Checklist
One person can take measurements and the other person can fill out the checklist and take photos....
-
C. Training
As part of its training program for election officials and poll workers, the County will provide training concerning temporary remedial measures, including: (a) why such measures are necessary...
-
Forward Approach: ADA Standard Section 704.2.1.2
Where a forward approach is provided, the distance from the front edge of a counter within the telephone enclosure to the face of the telephone unit shall be 20 inches (510 mm) maximum....
-
Scoping for timeshare or condominium hotels. (Section-by-Section Analysis)
units not subject to the ADA....
-
608.2.1 Transfer Type Shower Compartments
Transfer type shower compartments shall be 36 inches (915 mm) by 36 inches (915 mm) clear inside dimensions measured at the center points of opposing sides and shall have a 36 inch (915...
