The running slope of ramps and bridgeplates used for deployment to platforms shall be 1:8 maximum, as measured to the boarding platform with the non-rail vehicle resting on a flat surface...
Search Results "Parking Slope"
-
T402.8.2 Deployment to Boarding Platforms
-
11B-1010.1 Turning space
A circular turning space 60 inches (1524 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions....
-
11B-809.8.1 Door Thresholds
Secondary exterior door thresholds, including sliding door tracks, shall be 3/4 inch (19.1 mm) high maximum with a 1:2 maximum slope....
-
11B-1010.1 Turning space
A circular turning space 60 inches (1524 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions....
-
1010.1 Turning Space
A circular turning space 60 inches (1525 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions....
-
D. STRUCTURAL MODIFICATIONS
Highway Garage Building, the Lewisboro Library and the Community House at Goldens Bridge, at Cross River, and at Vista (collectively, the "Other Town Buildings") and Lewisboro's three public parks...
- Whitehall Mfg. Ligature Resistant Solid Surface Basin
- Whitehall Mfg. Ligature-Resistant Box with Hydraulic Flush Valve for Top Supply ADA Toilet
- Magnuson Group UMEA Waste Receptacles
- American Standard Ovalyn™ Universal Access Undercounter Sink
-
Selection of Methodology
survey respondents would initially complete survey questions within eight research sections: SECTION #1 Geographic, demographic, and political information (type of management agency, park...
-
7.4.11.2 Sign Contents
include at minimum the following information: Length of the trail or trail segment Surface type Typical and minimum tread width Typical and maximum running slope...
-
21.1 Q. Is a dwelling unit that has a split entry foyer...required to be accessible if it is a ground floor unit in a covered multifamily dwelling?
This would preclude a split level foyer, unless a properly sloped ramp can be provided....
-
305.2 Floor or Ground Surfaces
EXCEPTION: Slopes not steeper than 1:48 shall be permitted....
-
1011.2 Clear Ground Space
This section requires a clear ground space to be provided at outdoor constructed features and includes specific provisions for the size and location (1011.2.1), surface (1011.2.2), slope...
-
1017.8 Resting Intervals
This section contains the technical requirements for the length (1017.8.1), width (1017.8.2), and slope (1017.8.3) of resting intervals; and for a turning space (1017.8.4) where resting...
-
Wet Conditions [§405.10]
Landings are permitted slopes not steeper than 1:48 to allow for drainage....
-
11B-108 Maintenance of accessible features
It is not sufficient to provide features such as accessible routes, parking, elevators, ramps or signage if those features are not maintained in a manner that enables individuals with disabilities...
-
1.9.1.1.5
Some construction such as parking lot resurfacing, re-striping parking stalls, sidewalk repair and cabinet installations do not always require building permits....
-
Facility
Facility means all or any portion of buildings, structures, sites, complexes, equipment, rolling stock or other conveyances, roads, walks, passageways, parking lots, or other real or personal...
-
1.9.1.1.5
Some construction such as parking lot resurfacing, re-striping parking stalls, sidewalk repair and cabinet installations do not always require building permits....
-
1.9.1.1.4
Some construction such as parking lot resurfacing, re-striping parking stalls, sidewalk repair and cabinet installations do not always require building permits....
-
216 Signs
The guidelines also include provisions specific to certain elements and spaces, including parking, entrances, means of egress, and toilet and bathing rooms....
-
19.1 Q. If a sliding door track has a threshold of 3/4, does this trigger requirements for ramps?
The Guidelines at Requirement 4 provide that thresholds at doors, including sliding door tracks, may be no higher than 3/4 and must be beveled with a slope no greater than 1:2....