In compliance with Section 11B-206.7.1, wheelchair lifts may be used to access stages, platforms and orchestra pits used as performing areas....
Search Results "Compliance Date"
-
11B-206.2.6 Performance areas
-
11B-216.13.1 Use of Cleaner Air Symbol
including concessionaires, comply with the conditions of use identified in Section 11B-216.13.3, a Cleaner Air Symbol complying with Section 11B-703.7.2.5 is permitted to be posted in compliance...
-
5. Site Constraints, Technical Infeasibility, and Unusually Expensive Remediation
Locations at which site constraints make compliance with applicable design standards impracticable may be made compliant with the standards to the maximum extent feasible....
-
403.5.2 Clear Width at Turn
EXCEPTION: Where the clear width at the turn is 60 inches (1525 mm) minimum compliance with 403.5.2 shall not be required. ...
-
Carrier Programs
[Sec. 382.63(a)] The program must include: (i) a training schedule for training carrier personnel on compliance; and (ii) the carrier’s policies and procedures for accommodating individuals...
-
4.1.6(1)(d)
If stair modifications to correct unsafe conditions are required by other codes, the modifications shall be done in compliance with these guidelines unless technically infeasible....
-
1015.1 General
In alterations, when an entity determines that a condition in 1019 does not permit full compliance with a specific provision in 1015, the viewing area is permitted to comply with the provision...
-
4.5.1 General
In alterations, where a condition for exception in section 1.1 prohibits full compliance with a specific requirement for clear floor or ground space surface, slope, size, or location, the...
-
Are fire extinguishers required to comply with the ADA Standards?
The ADA Standards apply to fixed elements, such as a fire extinguisher cabinet, and require compliance with applicable requirements, including those for operable parts and storage....
-
What constitutes a “passenger loading zone”?
At other locations, compliance is not required even if passenger loading may occasionally occur, but is not specifically intended or reflected in the design....
-
Section 36.101 Purpose (Section-By-Section Analysis and Response to Comments)
prohibits discrimination on the basis of disability by public accommodations, requires places of public accommodation and commercial facilities to be designed, constructed, and altered in compliance...
-
Besam SL500 Surface Mount Automatic Sliding Door
Well suited to retrofit construction for easy accessibility and ADA compliance, the Besam SL500 surface mount can be used with a wide range of door materials including wood, hollow metal...
-
Schindler 330A Low Rise Borehole Hydraulic Elevator
eco-friendly holeless solution Suitable for a wide range of low-rise buildings, residential, offices, retail, hotels, hospitals and more Start-to-finish customer support Code and ADA compliance...
-
Corbin Russwin Inc. ED7000 Series Narrow Stile Crossbar Exit Device
requirements Heavy-duty construction Base metals (brass, bronze and stainless steel) for durability Easy-to-use crossbar operation assures quick egress and ADA compliance...
-
Inpro Corporation IPC® 855 Handrail
in an expanded selection of colors and patterns Traditionally styled handrail provides protection to the wall and support for users Meet safety codes with ADA and ANSI compliance...
-
Taylor ADA BLue-Lever™ Stand
ADA True Compliant We go beyond the ADA Design Standards into actual and true compliance....
-
ADA Solutions, Inc. Radius Tactile Detectable Warning Surface
All of our truncated dome tactile surfaces are in full compliance with the American Disabilities Act Accessibility Guidelines (ADAAG), Public Right-of-Way (PROW) and California Title 24...
-
Executive Summary
date. ...
-
1009.2.1 Pool Lift Location
Where the entire pool depth is greater than 48 inches (1220 mm), compliance with 1009.2.1 shall not be required. 2....
-
Sec.36.304(d)(2)
(2) If, as a result of compliance with the alterations requirements specified in paragraph (d)(1) of this section, the measures required to remove a barrier would not be readily achievable...
-
1. Adoption of the 2010 ADA Standards for Accessible Design
To minimize compliance burdens on entities subject to more than one legal standard, these design standards have been harmonized with the Federal standards implementing the Architectural...
-
1. Adoption of the 2010 ADA Standards for Accessible Design
To minimize compliance burdens on entities subject to more than one legal standard, these design standards have been harmonized with the Federal standards implementing the Architectural...
-
403.5.2 Clear Width at Turn
EXCEPTION: Where the clear width at the turn is 60 inches (1525 mm) minimum compliance with 403.5.2 shall not be required. Figure 403.5.2 Clear Width at Turn...
-
Exceptions [1014.1, Exceptions 1 and 2]
When a condition for exception does not permit full compliance with a specific provision in the technical requirements for camp shelters, the camp shelter must comply with the specific provision...
