While the Access Board may choose to promulgate requirements for the building under its other rulemaking authority at a later date, this type of requirement is outside the scope of the MDE...
Search Results "Compliance Date"
-
M304.2 Standing Surface (Section-by-Section Analysis)
-
Guidance Questions and Answers Concerning 49 CFR Part 39, ADA Rules Concerning Passenger Vessels
The date of this guidance is January 31, 2011. Part 39 does not include requirements pertaining to the design and construction of passenger vessels....
-
§104.8(a)
A recipient shall make the initial notification required by this paragraph within 90 days of the effective date of this part....
-
409.1 General
Machine location, date and time of transaction, customer account number, and the machine identifier shall not be required to be audible. 2. ...
-
Bathroom Accommodating Reduced Ambulatory Mobility
Because they are wall mounted, they can be lowered at a future date (for shorter people and wheelchair users)....
-
American Standard Lexlie Pull-Down Kitchen Faucet 8471.301
smooth, flowing design with gentle curves pairs beautifully with a variety of kitchen design styles, and the durable, long-lasting stainless steel finish is perfect for enhancing an up-to-date...
-
Companions
The one individual who is guaranteed space on the vehicle can be anyone—family member, business associate, friend, date, etc....
-
General: ADA Standard Section 223.1
Section 223.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for medical care and long-term care facilities.
-
11B-707.4 Privacy
Justice considers the communication-related elements of ATMs to be auxiliary aids and services, rather than structural elements, to which the Safe Harbor allowance for elements built in compliance...
-
104.11 Alternative materials, design and methods of construction and equipment
ETA Editor's Note Sections from the California Building Code Chapter 1 that are not adopted by the Division of the State Architect - Access Compliance (DSA-AC) have been omitted....
-
11B-707.4 Privacy
Justice considers the communication-related elements of ATMs to be auxiliary aids and services, rather than structural elements, to which the Safe Harbor allowance for elements built in compliance...
-
403.5.2 Clear Width at Turn
EXCEPTION: Where the clear width at the turn is 60 inches (1525 mm) minimum compliance with 403.5.2 shall not be required. Figure 403.5.2 Clear Width at Turn...
-
1.9.1.8 Adopting agency identification
ETA Editor's Note Sections from California Building Code Chapter 1 not adopted by Division of the State Architect - Access Compliance (DSA-AC) omitted. ...
-
11B-403.5.2 Clear width at turn
Exception: Where the clear width at the turn is 60 inches (1524 mm) minimum compliance with Section 11B-403.5.2 shall not be required. FIGURE 11B-403.5.2 CLEAR WIDTH AT TURN...
-
5. CONSTRUCTION TOLERANCES
CONSTRUCTION TOLERANCES: While it is always advisable to avoid design requirements that are at or near dimensional thresholds, construction tolerances may be used when evaluating the compliance...
-
Fixtures
For purposes of compliance with TAS 604.3.2, the reference to “fixture” shall mean the plumbing fixtures identified in TAS 213.3 and baby changing tables which are identified as convenience...
-
Gaps
However, if compliance with those measurements is not operationally or structurally feasible, operators may use bridge plates, ramps or other devices....
-
C.7.ii. - Can a federal agency provide alternate web pages for users with disabilities to supplement web pages that have innovative features which are inaccessible to assistive technologies?
be creative and innovative in the use of new technologies, Section 1194.22(k) requires that a text-only web page be provided only as a method of last resort for bringing a web site into compliance...
-
2010 ADA Standards for Accessible Design
Full compliance with the 2010 Standards is required only for new construction and alterations. The web address for the 2010 Standards is in the Resources section....
-
Executive Order 13132 (Federalism)
the relationship between the national government and the States, or the distribution of power and responsibilities among the various level of government; (2) imposes substantial direct compliance...
-
UNREASONABLE HARDSHIP
When the enforcing agency finds that compliance with the building standard would make the specific work of the project affected by the building standard infeasible, based on an overall evaluation...
-
12185(d) Deadline
If the President determines that compliance with the regulations issued pursuant to section 12186(a)(2)(B) of this title on or before the applicable deadlines specified in section 12186(...
-
§ 36.304(d)(3)
(3) If, as a result of compliance with the alterations requirements specified in paragraph (d)(1) and (d)(2) of this section, the measures required to remove a barrier would not be readily...
-
4.1 Path of Travel Upgrades Not Required
4.1 Path of Travel Upgrades Not Required: 11B-202.4 Exception 2 does not require path of travel upgrades for certain elements that have been previously constructed or altered in compliance...
