walking surfaces with slopes not steeper than 1:20, the bottoms of handrail gripping surfaces shall be permitted to be obstructed along their entire length where they are integral to crash rails...
Search Results "Support Rail"
-
505.6 Gripping Surface
-
206.2.5 Restaurants and Cafeterias
Examples of "same decor" include, but are not limited to, seating at or near windows and railings with views, areas designed with a certain theme, party and banquet rooms, and rooms where...
-
QUESTION: WHAT CONSTITUTES AN ALTERATION TO A PLATFORM FOR PURPOSES OF TRIGGERING THE APPLICATION OF SECTION 37.42 REQUIREMENTS?
For example, if the platform height relative to the top of rail is raised, if the old surface is removed and/or a new surface put down, or if there is a reconstruction of or structural change...
-
Specified public transportation (Section-By-Section Analysis and Response to Comments)
The term means transportation by bus, rail, or any other conveyance (other than by aircraft) that provides the general public with general or special service (including charter service)...
-
11B-505.6 Gripping surface
walking surfaces with slopes not steeper than 1:20, the bottoms of handrail gripping surfaces shall be permitted to be obstructed along their entire length where they are integral to crash rails...
-
Retrofitting Kiosks
The Trace Center, NFB, and BBI supported a phased retrofit schedule such that 25 percent of all deployed kiosks must be accessible by 1 year, 50 percent by 3 years, 75 percent by 5 years...
-
Grab Bars
Grab bars must be perpendicular to the pool wall and extend the full width of the wall so a person can use them for support into the water....
-
Acknowledgments
Thanks to MTDC’s publication and photography staffs, especially Sunni Bradshaw, for technical support and to Deb Mucci for design drawings....
-
704.10 Vertical exposure
the roof construction has a fire-resistance rating of not less than 1 hour for a minimum distance of 10 feet (3048 mm) from the adjoining building and the entire length and span of the supporting...
-
C.3.ii. - Do vendors have to provide product documentation in alternate formats?
Section 1194.41 of the Access Board's standards provides that product support documentation that is provided to end-users must be made available in alternate format upon request....
-
4. Exception from the Requirements of M301 for Certain Examination Chairs that Comply with M302
The Access Board proposed in M101.2 in the MDE NPRM to require diagnostic equipment to meet the standards for each patient position supported, meaning that if diagnostic equipment was designed...
-
M301.2.1, M302.2.1 Transfer Height
height of the transfer surface shall have a lower height of 21" maximum and adjustable to a higher height of 25" minimum, measured from the floor to the uncompressed height of the patient support...
-
Landscape Forms Inc. Multiplicity Bench Collection
As in the backed bench, long seat boards are supported on the underside by steel straps to ensure stability and enable flat shipping....
-
1015.3 Height
Along alternating tread devices and ship’s ladders, guards where the top rail serves as a handrail shall have height not less than 30 inches (762 mm) and not more than 34 inches (864 mm)...
-
1015.3 Height
Along alternating tread devices and ships ladders, guards where the top rail serves as a handrail shall have height not less than 30 inches (762 mm) and not more than 34 inches (864 mm),...
-
Turnstile Security Systems Inc. 2 Way Auto Swing Security Gate
When used in conjunction with our standard posts and rails provides a perfect access control solution for a distinguished entrance or exit route....
-
GameTime Roller Table
, tactile, and inclusive play activity for children of all abilities 44 precision-milled rollers with sealed bearings for a smooth, pinch-free ride Rounded, smooth side rails...
-
Covered Content on Primary Web Sites
Commenters who supported flexibility and carrier choice also expressed the view that fewer compliance options would inhibit carrier innovation and use of new technologies, limit Web site...
-
Gamco Surface-Mounted Robe Hook Satin - 76717
Flange and support arm shall be 22 gauge (0.8mm) and equipped with a concealed, 18-gauge (1.2mm) mounting bracket that is secured to a concealed, 19-gauge (1.0mm) wall plate with a stainless...
-
Maintenance of Accessible Features
An entity should recognize that certain types of equipment may require more staff support and maintenance than others (e.g. ensuring there are enough batteries for a pool lift to maintain...
-
5.2.1 Transfer Surface Size Recommendations for M301
The technical criteria do not address the overall width and depth of patient support surfaces because of the diverse shape and size of these surfaces....
-
If the manufacturer states that the design load is 800 pounds, can the transportation operator limit actual use to 600 pounds for safety reasons?
The manufacturer’s design load represents the amount of weight that the lift is capable of supporting....
-
504.2 Content Creation or Editing (Section-by-Section Analysis)
section proposes to require authoring tools to include at least one mode of operation for creating or editing content that conforms to WCAG 2.0 Success Criteria for all features and formats supported...
-
410.5 Digital Encoding of Speech
Recommendation G.722 shall be permitted where equivalent or better acoustic performance is provided and where conversion to ITU-T Recommendation G.722 at the borders of the closed system is supported...
