Section 303.3 covers the current ADA Standards for beveled level changes.
Search Results "Minimum Dimension"
-
Beveled: ADA Standard Section 303.3
-
11B-705.1.2.2.1 Perpendicular curb ramps
Detectable warnings shall be located so the edge nearest the curb is 6 inches (152 mm) minimum and 8 inches (203 mm) maximum from the demarcation line at the face of the curb between the...
-
11B-404.2.4 Maneuvering clearances
Minimum maneuvering clearances at doors and gates shall comply with Section 11B-404.2.4....
-
11B-705.1.2.2.1 Perpendicular curb ramps
Detectable warnings shall be located so the edge nearest the curb is 6 inches (152 mm) minimum and 8 inches (203 mm) maximum from the demarcation line at the face of the curb between the...
-
11B-404.2.4 Maneuvering clearances
Minimum maneuvering clearances at doors and gates shall comply with Section 11B-404.2.4....
-
M303.2.4.2.2 Height
Wheelchair spaces shall include toe clearance 9 inches (230 mm) high minimum above the floor measured to a depth of 6 inches (150 mm) maximum measured from the toe end of the wheelchair...
-
M301.2.3 Size (Section-by-Section Analysis)
The MDE NPRM proposed a transfer surface size for diagnostic equipment used in the supine, prone, or side-lying position of 30 inches wide and 15 inches deep minimum....
-
Clear Width [1016.3]
The clear width of ORARs must be a minimum of 36 inches....
-
1009.4.5 Grab Bars
The top of the gripping surface shall be 4 inches (100 mm) minimum and 6 inches (150 mm) maximum above transfer walls....
-
11B-411.2.1.2.3 Accessibility function button
The International Symbol of Accessibility shall comply with Section 11B-703.7.2.1, and shall be 5/8 inch (15.9 mm) minimum in height. The indication shall be three raised dots....
-
11B-502.5 Vertical clearance
Parking spaces, access aisles and vehicular routes serving them shall provide a vertical clearance of 98 inches (2489 mm) minimum. [2010 ADAS] 502.5 Vertical Clearance. ...
-
11B-1009.4.5 Grab bars
The top of the gripping surface shall be 4 inches (102 mm) minimum and 6 inches (152 mm) maximum above transfer walls....
-
11B-502.5 Vertical clearance
Parking spaces, access aisles and vehicular routes serving them shall provide a vertical clearance of 98 inches (2489 mm) minimum. [2010 ADAS] 502.5 Vertical Clearance. ...
-
5.4.1 Transfer Support Location for M301 and M302
This would be a minimum requirement....
-
5.4.3 Transfer Support Height for M301 and M302
The purpose of a minimum height is to ensure that the gripping surface is at an adequate height to facilitate positioning during a transfer....
-
KirbyBuilt Providence Picnic Table with Maximum Seating
Rectangular TableTop Height From Ground 32" Frame Tube Diameter 1.5" Table Footprint 100" l x 61.25" w x 32" h TableTop Dimensions...
-
BEA Inc. High/Low Mount Boxes Bronze Bollards
Dimensions: 42” (106.68 cm) x 6” (15.24 cm) x 4” (10.16 cm): Mounting: Surface mount or attached to single/double gang, or 4x4 electrical box (All on face of bollard post)...
-
5.8.3.1 Breast Platform Height Recommendations
The final version of the criteria must clarify that the specified height range is a minimum range of travel....
-
1011.4.2 Wheelchair Space
Wheelchair spaces shall be 30 inches (760 mm) minimum by 48 inches (1220 mm) minimum. ...
-
STEP 2
STEP 2 Determining what is needed based on Table 240.2.1.2: Table 240.2.1.2 Number of elevated play components provided Minimum number of ground-level play components...
-
M201.1 Enforcing Authority (Section-by-Section Analysis)
The MDE NPRM proposed to explain that the enforcing authority would specify the minimum number of types of accessible diagnostic equipment that would be required to comply with the MDE Standards...
-
7(2)(b)(iv)
In locations where toilets are adjacent to walls or bathtubs, the center line of the fixture is a minimum of 1'6" from the obstacle....
-
11B-504.2 Treads and risers
Risers shall be 4 inches (102 mm) high minimum and 7 inches (178 mm) high maximum. Treads shall be 11 inches (279 mm) deep minimum....
